Viewing all customer Discussions for:

18-166 5/8" Top Sash Guide, Kinco

Need channel balance parts for kinco window. Upper and lower shoes and top sash channel.

I have attached a few photos. One is the measurements of my current top sash but the picture of my sash IS NOT in that photo...the two additional photos contain my original sash. What part do I need? I cannot find a exact match in your catalog...thanks

It is a Milgard 's non tilt window and The window # H-LC30-48x78 & H-R20-108x78 .The Channel balance length is 27?and The width is 1/2?. The balance stamp on it is 26-4 BSI . please identify what the replacement number for the channel Balance is and let me know so I can order a replacement for repa ... (cont.)

Top sash guide what number part and other small chip wall see picture thanks todd becker

Picture of 30 inch channel balance and top sash guide. They are lawson window from 2005.window size 30 x 51 weight 38 to 39 lbs. And other window is 36 x 34 weight 28 to 29 lbs.

Hi,Please find attached 5 pictures of the sash balance I need The length without the plastic tips is 30" and about 1/2 inch widthThanksManuel

Need to repair window balances on several different size windows. This is window size #1. Please see images attached.

7/16 top width 1/4 bottom 1 1/2 long

1/2" wide × 7/8" deep top sash guides with 2 screws in spare bedroom windows.

It looks like the 18-064 but it is not 1/8 in from the bottom of the top lip.

I will send additional photos

Bought the Kinco 5/8" Top Sash Guide Item #18-166. They worked for a while but the window does not hold in position. Maybe they are too thin with a 1/2" deep cap? Please advise a better replacement.

Tooling for a top sash replacement piece

I need a channel balance and a top sash guide for my window The channel balance has the marking on it of CALDWELL 28 3 10.Thank you for your help, I will need to order 2 channel balances and 2 sash guides.Thanks againRon

This part is on each side of the lower window. These windows were installed seventeen years ago and they are plastic.They appear to be some kind of stop that prevents the spring from coming out of the frame.I need two.Thanks for your helpRegardsCharlie

Swiso, I think I need the 351 series vs the 390 series. The Shoe is different by 1/8". The Shoe and Top guide do NOT have wings (385 series). The measurement for the Top guide 1 1/4" H x 1/2" D x 1/2". the Top guide has 1 screw in the bottom section of part, no other holes. The metal part of the Cha ... (cont.)

Stamped s 2930

Can you please identify this part, I think I ordered it from you in the past and I need to buy more

I've purchased a few of these and I always seem to get it wrong....Any ideas?

This is attached to the side of and at the top of the window sash