Viewing all customer Discussions for:

39-317 Truth Split-Arm Operator

Hi, looking for some guidance on a replacement operator. Closest I have found is the 15.26. Any assistance is greatly appreciated. Jim

The first picture is my old crank. The second picture I ordered from you a couple of months ago. The issue I am having is the arm on the new crank is longer. Thank you Wendy & Jeffrey

no name on window hardware has number 21550 also the word truth it is a double casement with stationary center pane

looking to replace window crank hardware

Pictures of Truth 40887, right Wright , left

#07907 on l #7701 on base

Hey Swisco, these are the pictures we spoke about. I will send pictures in 2 emails. I need mechanism and crank to open window, tide bar and guide, and also window lock. #7479067, #7479068

Do you have a smaller size variant of the 39-315 Truth Dyad Operator? Mine in the attached picture says "Truth" stamped into the underside of the bent arm. The hole spacing on the body is 3", but the straight arm length is only 4" and the bent arm dimension is only 2-3/4" (measurements taken per dim ... (cont.)

I am in need of Delmar window parts for which I have attached pics. (1) crank mechanism, 4" body width. (3) securing slide brackets. (2) lock handles with pins I also need (6) screen retainers (turning butterflys that capture screen inside the room). Thanks, Jeff Anderson DID THIS GO ... (cont.)

Posted this morning but did not get an answer, D14056 is my question. Posted that I needed a replacement operator for a Wright window operator. Looks and measures like an old post of a previous customer. Here is the photo again. Do I have to get a handle and new spleen for this replacement item ... (cont.)

I recently purchased a Split-Arm Operator (39-317) to verify if this would work for all of my windows. When assembling the test window I noticed that the extension arm (has 31550 stamped facing down) is underneath the main arm and I am needing this above to fit properly with the window screw holes ... (cont.)

Good Morning; Am search for replacement crank handles for the Truth Mechanism installed in my Schuco Casement Windows in the Spring of 2006. The handles are "spinning" around the spindle; hopefully, changing the handle will solve the problem as changing the spindle does not look easy The lef ... (cont.)

Someone has tried to pry off the cover causing the gears to malfunction. is this cover removable? The only markings are on the arms, TRUTH and 21550

Wright split arm operator like 39-387/388 but screw hole pattern different and dimensions 4 1/2 x 3 1/2 rather than 4 3/4 x 3 1/8. Also, what handles go with this?

All of the windows in my kitchen have broken hardware, and as a result, I cannot open any of them. They are all casement windows with crank hardware and plastic latches. In two cases, the crank operators are broken and in one case the locking latch is broken. I have contacted a few handymen to se ... (cont.)

I AM LOOKING FOR REPLACEMENT CASEMENT OPERATORS TO MATCH PICTURES. SPLIT ARM. GEAR ARM IS 4-3/8' CENTER OF RIVET TO CENTER OF GEAR. HINGE ARM IS 3-1/2" FROM CENTER OF RIVET TO CENTER OF CLIP POST HOLE. EXISTING IS "WRIGHT" WITH #7702 STAMPED ON UNDERSIDE OF HOUSING, #07900 ON HINGE ARM AND #07868 L ... (cont.)

I need to source a Truth Replacement operator for a casement window. I have attached a picture but wanted to share the dimensions as well. The color is clay The distance from the center point of the body to the center of the first arm link is 4 and 13 /16 inches The distance from the cente ... (cont.)

I need to replace some parts for my window. I am unable to identify the part #. It says its a DelMar. Could you please help me look for the part # and how I can go about ordering them. The lock latch is about 3.5" The crank left and right is about 4" And the riveted holder is .75" ... (cont.)

The picture is for handle lock . It is from the same window as the truth operator. Dimensions for hansle lock: From pivot center to end of tab is 2.25". Handle is 3" from tip of handle to center of pivot. Mounting holes are 2 3/8 center to center. The operator is exactly like Truth-Dyad/pd/C ... (cont.)

I need to order there parts for all my windows. I need 9 of the locks as well as 5 of the cranks.