Viewing all customer Discussions for:

19-037 Channel Balance Top, Rollyson

Only marking on it are 2340

I need 10 window balances like the S380. I have attached photos of them the numbers are 2830 , 2830Z, and 30 C. They have wing tips on the top and bottom. The depth of my balance shoe is 7/8".

Hi, Can you please help me find the right channel balance. I have 3 window sizes. The large Window metal part measure 33" and tab on metal label "3330/", the medium window metal part measure 28.5" and tab on metal label "3330". The small window I cannot find the old channel balance. I only can meas ... (cont.)

Hi, I would like to order a single channel balance, plus parts.The current channel balance indicate 28C inscribed on it. It is half an inch wide and 28 inches in length. It's for a non- tilting window. Thank you

All of my windows are beginning to break. First the plastic parts at top of channel balance. Channel balances getting stuck. Entire bottom of window fell out of one window already.

Original windows in house built in Ohio in 1983. Channel balance measures 28" long and 9\16 wide. The number is 2740Z.

I've been looking to match balance, can you help . Thanks

Hello Paul, I have some B.S.I 27 C balances, and have been looking at the posts. I believe the the S380-28 looks close but thought I would send some pics and get your opinion, if you would. I have a duplex I am working on and they need replacing. Thanks very much, Steve

No distinguishing brands or part numbers visible. Top plastic clips are broken on almost every window. This one had cord broken on one remaining channel balance. Apparently other channel balance cord broke previously and balance removed by previous owners. I'm guessing several windows need new b ... (cont.)

this seems to be like the Series 371 Channel Balance with 19-031 top guide and a winged 15-005. However on my balances the "wings" are about 1-1/16. Any insight? Thanks!

Hello, I need to order qty6 of the 3330 channel and qty 4 of the 2740x....need to replace dont know what to order. Can you advice so I can order?

12" channel, 27" long, Stamped 2640

Hello,I need to order two of non-tilt window channel balances for replacement of broken ones on a bedroom window. I used your website to determine which to choose but was unable to determine which of the S-series channels to order. The channel is a 1/2" channel width and a length of 24". Since I ... (cont.)

My damaged channel balance is stamped 2320. It is 24" long. The attachments at the top and bottom are shown in the photos. Which series matches these attachments? Thanks, Matthew

I felt good about placing an order, but then I reviewed the picture of the shoe and the 1 3/32 measurement through me off. I need 6-3330 and 6-2740x complete balance. Will the shoe work compared to my photo?

Talked to Steve just now

I need 2 channel balancers 1/2" with 19-037 tops and 15-005 shoes. There are no markings on the windows to tell me the manufacturer. The balancers are stamped with 2920. Windows are approx. 35 yrs old. single hung non tilt. The channel that the balancer slides in is about 1 1/4" wide ... (cont.)

They are 1/2" channel balancers, two different lengths from separate windows. One is stamped with B.S.I. 27 C but measures 28" the other is stamped B.S.I 33 C but measures 34" long. Both balancers have the same end pieces, the T shaped adapter on the spring end is about 1 3/8" wide. The far side nea ... (cont.)

Here are pictures of my channel balance. Please let me know the model ID and price and expected time of receiving the balances. I need 6 of 3340 and 4 of 2340.

Looking to replace 2 sizes of window channel springs on Rollyson windows from the 1980's. Have a total of 6 windows, but all that remain are the aluminum channels and what appears to be one top guide end as identified below. Info is as follows- 1) 29" long, model 2830, top guide app ... (cont.)