Viewing all customer Discussions for:

18-171 Stepped Sash Guide, Alpine

Dear Sir/Madam, Can you please help me find this part? It's a sash cam that mounts to the side towards the top of the window. The measurement is 5/8" width, 1-3/4" length overall. The top box is 7/16"W x 3/8"L x 3/8"H. It has two holes on the body. Thank you so much!

The plastic piece to the window that catches the spring is broken - I ordered parts from your company - they are the correct parts but the plastic piece to my window is broken and will need to be replaced - I will need four - please see pic attached - Thank you!

This hardware part sits above Channel Balance for window 24.2 lbs and 28 inches channel balance length.Part length: 2.25 inches / 5.5 cmtop part widths: 5/8 of an inch / 1.5 cmbottom part 7/16 of an inch / 1 cmThank you for help!Nahrin

The unit is 29 inches long

This sash guide in the pictures has deformed and broke. The guide is screwed with a single screw into the top of the channels on both sides of our single hung windows (only the bottom window goes up and down) and this sash guide holds the window balance in place at the top of the moving window. Th ... (cont.)

Depth of winged shoe fitting is 1.25". Top piece is also winged. Looking for replacement channel balances.

-Length of metal channel is 25-5/8" -Stamp says 25-5 BSI -Window Manufacture unknown

Hi there. Need new balance , probably two, used to have one on right side Balance 34 inches. Sash weight 27.6 lb On photos broken part that attached to window. Thanks. Leo.

Need to purchase replacement channel balance and the guide that attaches to the window side. Thanks.

could use four of these itemsthanksgregory

i need a window balance stop that looks likr this i need this quick please help

Hello, we have a H-LC25 type window and need to replace one of the top sash guides. Attached a picture of the good one. Do you sell this type?

I need a replacement part number for an Atrium 26-3 LX CMC 11 balance with a channel length of 27". I also need the part number for the plastic stop that attaches to the top left inside channel of the window but there is a 5 photo limit so I will submit it on another post.

I must have ordered the wrong size. I assumed the 5/8 were universal. These measure top to bottom 2 1/4 inch. Top to top hole 1 1/8 inch and side to side 5/8 inch. Can you please help me out with the correct part? Thank you.

Removed from each side of the window...

Hello I need another channel balance stop plastic piece. The one pictured is it's mate on the opposite side. It is from 2930 block and tackle

I need 27" (measuring metal only) Kinro balance springs for my Kinro windows. Stamped in the metal is 26 2 and B.S.I. (See photo attached). I also need a part number for the take out clips. Thank you for your time.

My balance is stamped 21-5 BL5 CMC 43. The metal length is 22" and the width is 9/16". Top and bottom plastic pieces have wings. IMG_7708.jpg is of the top corner of the window sash. This plastic piece broke on the other side of the window and I'm not sure what it is called, but I need one of these ... (cont.)

Please find attached several photos of my Atrium window balances. The part I need most is the little white plastic part that screws into the window itself. You can see in the photo the broken part. I also want to order the balances (stamped 22-5). Please quote me the correct part numbers from yo ... (cont.)

Hello. I can not find this Top Sash on your website. Can you help me identify this part? Do you carry this part? Or something that would work. Thank you.