Viewing all customer Discussions for:

S385-21 21" Series 385 Channel Balance

Bar is 21" in length and 1/2" in width. The stamp says 20-2 AA CMC 7.

I have several windows manufactured by Milgard, that the balancers are old and damaged and I'm looking for replacements. Thank you.

Hello, I need both sides, thank you.

I have a customer asking for a replacement for the Spring Balance Side in the attached pictures. Could you please provide the part number of know?

Hello, can you please let me know which replacement I can use for my windows? I have milgard windows which are about 20 years old. the note on the balance state 20 3 EU CMC 4. Thank you

I need assistance identifying replacement window channels. * Milgard Window * Channel is 1/2 inch wide and 21 inches long * Stamp says 20 9 FV CMC 2 (I know this is old) Thanks in advance for your help! Michelle

Hello,Please assist in identifying this channel balancer. It looks like either a 380 or a 385 series. The marking on the part read (20 4 D1)Best,Arturo

Please identify the parts order number. Stamp reads 20 4 BN CALDWELL

metal channel: 21 inches stamp: 2040 (see Bottom Fitting) windows origin: Don't know I need 2 windows sash balances as for now.

Dimensions are as follows Frame length 21" Top wing width .944 end to wing .77 Bottom wing width .915 depth wing to front 1.094

Need to of above 21 inches long?. Markings say 2040CD and along the edge is B.S.I.

I have 2 different sizes, 21" and 33"

I am writing to figure out what channel guide do I need to buy for the following milgard windows h-c40-54x90, 5220/5270 channel guide seems 1/2" wide and only has the following markings on it 20 9 JQ CALDWELL I measured it and it seems to be about 21" long. What should i go with? ... (cont.)

Hi, I need to order replacement window channel balance. There is a part number on the part that says "20 3 Caldwell KM". I have attached the photos of the part. Please help identify what to order. Thank you!

I need to order a new channel for my window not sure whate kind and what option I need.

Photos attached are from original channel balance. 20.5 gx cmc 7

Where can I purchase this 20-4 IX CMC 7 ? I require about 2 of these. Thank you

I need to replace two of these window balances on a non-tilting window. Channel length is 21". Window is Milgard, installed in 1998. Please help in identifying this part.Thank you,Margaret

Part number on these is 20 9 AQ Caldwell

Hi, I'm looking to see if S385-21 is the right part. I have attached a picture of the part with a ruler. There is 20-4 printed on the part. The top guide measures to be a 60208 from other site numbers. It is a winged version. The bottom guide I couldn't find a match for on your website. Other pl ... (cont.)