Viewing all customer Discussions for:

S385-29 29" Series 385 Channel Balance

Channel is 29 inches long for just the metal, the Block and tackle section fell out as I was removing these as they were broken, need to know what replacement I should buy. I've done plenty of spiral balances in my homes. This is the first channel.

The window in a rental broke....origial window from NuAir. It is 1/2" wide and 29" long. Thanks for the help.

Could you help me identify this channel for a single hung window from CGI It seems to be a Series 4100, but I don't have the original sticker anymore Channel size: 29" Thank you

This 29 inchs long the string broke in one of them the markings on the back are 28. 3. GW. CMC. 11

Thank you for your help! I need 4 balances. They're for 2 different windows, they seem to be identical but 2 say "28B" and 2 say "28D". Photos attached!

Looking to replace the channel balance. Its 29 inches long. The photos are attached.

See attached pics: 28B and 28D I have six windows and will need: 12 balance rods 12 clips 12 plastic stops

Hello Swisco, Please provide your recommendation on which window balance I need. The metal channel is about 28 15/16” long, and 9/16” wide. It looks like 28D USB is stamped on the back. I’ve attached some photos, unfortunately I don’t have any pictures with the balance i ... (cont.)

Rail is: 29 inches.stamp on rail is: 28D

The balance is marked "28 5 DL Caldwell" as shown in one of the photos. It's winged on both ends. Can you help me make sure I order the right part please?I also weighed the sash using a bathroom scale. It's around 35-36 pounds.Thanks!Scott

I have 20 year old windows. The marking on the balance springs say 28C USB. The width measures 1/2 inch. Can you recommend a replacement?

Kinco non-tilt single hung windows. Aluminum. Balance is corroded and broken. Balances marked "28 3 HT CMC 4" I've bought top sash guides for these windows from you in the past. This is the first time a balance has broken.

Good afternoon we purchased our house in 2009 and we are looking to replace the block and tackle type window balancer which is broken in one of our windows. Please see the attached pictures. When I measured the metal piece, it was 29 inches. We looking to purchase two new window balances. ... (cont.)

Window balances 29'' length and 1/2'' channel i cant find marks

I just returned the 28" series 385, 2750 and it was 2" too small as the original channel measures at 29". Which on would you recommend?

Believe they are 1/2 " wide and 29 inches with a Stamp of 28G Struggling with specifc type/model - several look similar. Photos are of top and bottom. Need 8 and have impact windows

I have this length is 29", 5/8" wide channel, with stamp 28B.

1/2 inch non tilt window balance 29 inches long Engrave with number 28 4 t BSI

message

The length of metal channel is 29 inches. The stamp reads 28B USB. I am not sure who manufactured and when is was made (though likely in 2005ish). I need two for now to make sure they do work.