Viewing all customer Discussions for:

S385-33 33" Series 385 Channel Balance

channel balance 1/2 inch, non tilt window, the channel balance has 32 4 FV CMC 7 stamped on it. What replacement part do I need?

I have Milgard windows and need to replace a pair of balances. I've narrowed it down the S385 and 33" balance, but do not know what weight to give it. The stamping on the old balances are 32-4-JQ Caldwell. Also, is the 16-002 a standard take out clip that likley works on Milgard? ... (cont.)

Hi SWISCO! Topic is block and tackle window channel balances. I have removed the two balances from a single hung non-tilt window, as the window was not operating properly. One balance has an inked marking of: 32-9 IX CMC 11. The other balance is inked with: 32-9 EX CMC 4. From the CMC, I believe bot ... (cont.)

Hi, I would like to order new channel balances for 3 windows. The balances are labeled as 32-5 GA2 CMC 5. I measured them and iit appears to be a 33 inch balance. I believe I need your 33 inch series 385 Channel Balance but not sure of the sash weight. Can you assist based on the pictures prov ... (cont.)

Hi Need replacement for sash balance - single hung non tilt window. Photo's attached. Thank you Ray

I have a single-hung, vinyl Marvin Window and I need to replace one of the Channel Balances. The sash size is 45 and 5/8th inches and the height is 34 and 7/8th inches. I have measured the metal portion of the broken Channel Balance and it is 33 inches. The plastic shoe and top that comes with your ... (cont.)

Hi, I need to replace the caldwell channel balances. They are 32 7/8" long and please see pics for type of ends. I only need two for one window. The only stamp on them is the name "HQ Caldwell". Let me know if you need more information. They are for a single hung vinyl window.Thank youJesse ... (cont.)

I have non-tilting milgard window that needs new channel balancer. According to the tag on the window, I have mfgr: mil-027-4 series: 1510-S mst: 4-0 x 6-0 mvt: 47" x 36" when I took out the balancer, it shows 32 4 HQ CALDWELL stamped on it. can you please let me know which channel balancer I should ... (cont.)

Need two window balances

Need two replacement balancer. 33 inch long 1/2 inch wide 1/2 inch tall 32 9 cr Caldwell

Markings are: 32 6 EW CMC 10 Help?

I'm looking for replacement balances for my Milgard window. Balance: Length is 33 in, Width 1/2 in and Shoe width is 1 in. The 2 balances have different numbers printed on them, which confuses me. Given this information can you provide the correct balances to order? Thank you, Steve ... (cont.)

32-3 ID5 CMC 54

1) The metal part of the balancer is 33" long. 2) The width on the "U" bottom side is 1/2" wide. 3) The "wing span" at the bottom end of the balancer is 15/16". 4) The print says: "32 3 CL CALDWELL" on the back of the balancer.

Unique 32-C-30 Measures 33" in length from metal end to metal end. Looks like it's ⅝" in width.

33 Long, 1/2 wide

I have a 33" sash that matches up to the 385 replacement. My stamping is "32-12 GB5 CMC (32HP39-41 )" What option should I use?

So I just received the S385-33 and am watching the videos to install. The problem I am facing is that the hook on my window appears to be too high up on the window and I can't hook the channel into it and push it down far enough to get the top to catch in the metal stopper. There is no "give" in the ... (cont.)

This part is attached at the top of each side of the sash and engages the sash balance. When installing the new sash balances from you I found some to be broken. The length is 1-1/2", and the width is 5/8". Do you carry this part? Thank you, Mike

block & tackle type, 33inches long not including clips, marked '32 3 HP CALDWELL' pics attached of each end with broken clips. I would like to order 10each