Viewing all customer Discussions for:

S385-33 33" Series 385 Channel Balance

Hello! I'm attaching pictures of a channel balance I need to replace. One of the pictures has the stamp, but I am unable to find any numbers on the plastic shoes at top and bottom. From the pictures attached, would you be able to identify and inform me what channel balance I need to order? The me ... (cont.)

I need a replacement balancer for a Milgard window single hung, non-tilt but I'm unable to identify the part number. The only info on it is printed (not stamped) it states: 32 4 GS CALDWELL. The metal part of the balancer is 33" long. The window was new around 1998. There is a label on the top of th ... (cont.)

I need to replace 2 balances with the # 3458 stamped

I believe the correct balance is the above, by the photos of the plastic thingies on the end and measurements. But my weight stamp does not correspond to your list. The windows were installed in the 1990s, if I recall correctly. The stamp is 32 3 AP Caldwell Can you help with the correct product ... (cont.)

Trying to determine if you carry the replacement parts for these channel balances. Our windows are non-tilt & the balances are 1/2" Thank you for any assistance! Margaret

balance on Milgard Tuscany, metal channel 33 ich. long , 32 inch. fro wing to wing, please let me know if you have it.thanks

These Caldwell balances have "32 4 IP CALDWELL" stamped on them. Other ones had different letters than IP, like HP. The metal portion is 33 inches long. The channel has a ridge at the bottom which is 5/8" wide, but the main portion is slightly bigger than 1/2".

Please help me find the parts. I saw one on your website. That should be fit. But i am not sure about the weight capacity.

1/2 width, 33 in length

channel balance 1/2 inch, non tilt window, the channel balance has 32 4 FV CMC 7 stamped on it. What replacement part do I need?

I have Milgard windows and need to replace a pair of balances. I've narrowed it down the S385 and 33" balance, but do not know what weight to give it. The stamping on the old balances are 32-4-JQ Caldwell. Also, is the 16-002 a standard take out clip that likley works on Milgard? ... (cont.)

Hi SWISCO! Topic is block and tackle window channel balances. I have removed the two balances from a single hung non-tilt window, as the window was not operating properly. One balance has an inked marking of: 32-9 IX CMC 11. The other balance is inked with: 32-9 EX CMC 4. From the CMC, I believe bot ... (cont.)

Hi, I would like to order new channel balances for 3 windows. The balances are labeled as 32-5 GA2 CMC 5. I measured them and iit appears to be a 33 inch balance. I believe I need your 33 inch series 385 Channel Balance but not sure of the sash weight. Can you assist based on the pictures prov ... (cont.)

Hi Need replacement for sash balance - single hung non tilt window. Photo's attached. Thank you Ray

I have a single-hung, vinyl Marvin Window and I need to replace one of the Channel Balances. The sash size is 45 and 5/8th inches and the height is 34 and 7/8th inches. I have measured the metal portion of the broken Channel Balance and it is 33 inches. The plastic shoe and top that comes with your ... (cont.)

Hi, I need to replace the caldwell channel balances. They are 32 7/8" long and please see pics for type of ends. I only need two for one window. The only stamp on them is the name "HQ Caldwell". Let me know if you need more information. They are for a single hung vinyl window.Thank youJesse ... (cont.)

I have non-tilting milgard window that needs new channel balancer. According to the tag on the window, I have mfgr: mil-027-4 series: 1510-S mst: 4-0 x 6-0 mvt: 47" x 36" when I took out the balancer, it shows 32 4 HQ CALDWELL stamped on it. can you please let me know which channel balancer I should ... (cont.)

Need two window balances

Need two replacement balancer. 33 inch long 1/2 inch wide 1/2 inch tall 32 9 cr Caldwell

Markings are: 32 6 EW CMC 10 Help?