Viewing all customer Discussions for:

26-040 Pivot Bar, 3"

Looking for pivot (terminal pin) balance shoe and lower sash tilt latches (wash locks) for 1993 vinyl windows no identification markers on windows

I am looking for a replacement pivot shoe based on the attached photos. The dimensions are: 2.0" x 1.25" x 0.6" or (50.9mm x 31.9mm x 15.4mm). Thank you!

HelloI have a Mastic window with both pivot bars broken off due to rust. I've tried to pull out the old rusted ones but metal just keeps breaking off more. Wondering if a longer pivot bar (with tip for going into shoe still in wall) could be put on the outside channel of the window rather than insi ... (cont.)

Hi, looks like you guys can help me but I wanted to make certain you had all the parts. I need the balance and the shoe but I also need the metal piece that comes out of the window. That piece is a 2 1/2 inch long metal channel that is about a quarter of an inch wide and is what fits into the shoe. ... (cont.)

I have noticed that all my upper sashes use the 26-412 cast pivit bar and the lower sashes use 26-040 steel pivit bars. many of the upper bars have broken when I have taken the windows out. Is there a "steel" replacement picit bar I can use that would have the same screw hole spacing as my 26-412 c ... (cont.)

Hello - we ordered and installed new spiral balances S600-24 and 15-046. Once installed we realized that the bottom of the window was missing the piece to connect to the right side pivot shoe. Looking for this replacement part.

This part connects the double hung window into the balancer. It is a tilt in window and this key part screws into the bottom of the window a inserts into the balancer. When the window is tilted back into place it releases the balancer. One of these little channel insert pieces broke and I'm looking ... (cont.)

Need to replace both of the window tilt latches on my window and would love some help finding the part. the pin fits into that blue u shaped slot and the bracket the blue receiver is in helps lift and lower the window. the slot is 9/16ths inch wide.

Hi, My father is installing 2 windows and somehow managed to misplace the spiral balances. I was hoping you could help me identify the right ones to use as a replacement. The fittings (on the photos) suggest a spiral balance with 4 rods at the end, similar to the ones on your website for the tilti ... (cont.)

Hi! I have 2 windows both with a top sash that has dropped. There are no pivot pins in either to match up, I don't know if they fell into the window sash itself. I attached a pic of the holes, thanks.

This is not the broken one. It looks like it is 2 1/2 inches long. Space between holes more important?

Good morning! There are no names or markings of any kind on the windows. I need your help selecting the right replacement parts for my (5) single-hung windows. Attached are pictures of the broken channel balance shoe and pivot pin. The sash weighed 18lbs. The Channel balance (28B stamped on) measure ... (cont.)

31 windows in my house with year round salt air exposure leads to a lot of rust and corrosion. Was hoping I could replace a number of these that have given out. Not sure of the window brand. Maybe DACO? Any help would be appreciated.

I have several windows that won't open and need to know my window type,so I can order parts to replace for them. It'll be great if you could help me to find my window types specifically is the coils for them.

Need 3" metal pieces to replace original rusted parts. They are at the bottoms of the sashes and fit into the balances. vinyl windows. See sketch.I am wondering if the 26-068 pivot bar will be correct for this repair. If so I need 16 of them. Thank you.John Quinlan

need to replace balances and pivot shoes for tilt in vinyl double hung windows with U shaped channel balances using string exiting from the bottom of balance connecting to the pivot shoe. The U Channel Balance dimensions: 34"tall, 1/2"width and depth. Balance is stamped near the bottom +DB 34C a ... (cont.)

Good Morning - going to be ordering a few parts for some older windows. One issue I am having with two of the windows is the gap between the sash and the frame. The pivot falls out of the slide because there is some space and the pivot will not stay in place. The current part has about 1/2" protrusi ... (cont.)

I have single hung tilt windows with spiral balances. The house/windows are about 19 years old. I've viewed your videos on identifying the type of balance, but mine do not have colored tips, and the diameter seems between the two options. Diameter seems between 3/8" and 4/8" (see photo). Length is a ... (cont.)

Looking for help identifying these parts for replacement. Thanks for your help

Hi, I think I need the spiral and the parts to attach it to window.