Viewing all customer Discussions for:

26-040 Pivot Bar, 3"

I've got a problem with the tilt pivot bar that was originally installed in our WOOD window sashes they used a pivot bar like Pivot Bar, 3", Product Code: 26-040 they drilled a hole in the end grain of the bottom rail and now they are all splitting.... looking for a better pivot bar/bracket t ... (cont.)

pivot shoe is 2" high 1-1/4" inches wide and 5/8" thick and it works with pivot bar 26-040.

I am searching for Traco TR-5000 balance shoe, sash plunger, sash plunger hook and sash plunger springs. Do you happen to have any of these in stock? What would the prices be on each if you do have them?

I am trying to find the manufacture of this window from 1997. Your pivot bar 3 in. # 26-040 is the same as this unit. Thanks

single hung vinyl window, pins on side of bottom window, at the bottom. Pins go into the spring tension to hold window in. shape - U channel metal piece 3 inches long with screw holes at 1 inch and at 2 inches.

I looked up the window balancer via the patent number. Your web site came up. The 15-087 appears to be what I need. I am unsure of the coil spring. Also the pivot bar is completely risted off. I do not see the part number for that. I had to order the sash spreader to remove the balancers. Is there a ... (cont.)

Good morning, Please identify the attached parts. Thank you, Mike

Hi, I just recieved new spiral balancers (part S600-20) and pivot shoes (part 15-015). I can see now I need the swivel bar and its holder that go into the bootm of the window. enclosed are photos of the reciever, but the bar itself was completely corroded. Can you help me identify the replacement pa ... (cont.)

I have attached a picture of my pivot shoes that I need to replace. Most of them are broken and will most likely replace them all to be on the safe side. The shoe (which also has a 200/574 stamp on it as mentioned above) seems to match the 15-045 model. They have the same measurements. My spiral ... (cont.)

I have a Pivot Lock Shoe that looks like 15-047, including the black cam, and matches all dimensions except for the thickness. I measure 9/16 inches with the cam fully recessed for raising and lowering the window. With the cam extended when tilting the window, I measure 5/8 inches. The channel ho ... (cont.)

I took some pictures of my problem windows. Things I know for sure- American Craftsman Circa 2001 or early 2002 When some cleaning people were washing the windows they inadvertently made them crooked and the hinge snapped. This is the bathroom window. Jennifer

I have Traco model TR5000 windows in an apartment builing that need some help. I have been told that Traco does not support this model. I will need all of the different parts, spiral balances, tilt latches, etc. Do you have a list of the parts that fit this model? Thanks, Bob

Attached are some photos of window tilt latches that I need to replace. I hope you can identify these as there is no branding on the windows. Let me know if you have them and the cost. Also if I need any specific tool to replace them. Thanks! Alan

One of my pivot shoes cracked and broke. The house was built in 1999. If you can determine which part I need, I'll buy a dozen. I also need to replace a couple of pivot bars that match the shoe. A half dozen of those would be sufficient. I also wish to purchase the charging tool. ... (cont.)

isuccessfully installed the 15 046 and the s600 29 in my window project but the pivot bars are completely rusted away. They are attached to the window with a single screw,into an adjusting slot. the old 15 046 matched the new ones perfectly. can you suggest new pivot bars that will work with this ... (cont.)

Wanted to verify parts for a Silver Line 1200 window. Pics attached. Looks like a 26-040 and a 26-192 might be the parts, but was wondering if you could confirm before ordering the parts I need. Thank you.

The dimensions for the attached are: 2-15/16" long 9/32" wide 5/32" deep 1-15"" from pivot end to center of threaded screw hole. HELP...several window pins failing.

One of windows no longer stays up when raised. I compared it to the other windows and it's missing a plastic part with a screw in it. What do you call that part? Where can I get two? Thanks. Brad

Hi, I need to replace the pivot shoes on our Acorn single-hung tilt-in aluminum windows. I know I'll have to remove the lower sash to do this. The pivot shoes look like either the 15-046 or the 15-121. With this style of shoe, do the pivot bars have to be removed in order to remove the lower ... (cont.)

Looking for the retainer clip that is under the screw. It keeps the sliding window in place. It is an alumium frame window that is about 20 years old