Discussions for S165-4 : SWISCO.com

How to join 3 coil balances together?

I've identified I need the 165 4 lbs Egress Coil balances to fix my windows. Each side has 3 coils so I was going to buy the 15-205 triple balance cover. My question is...do you provide instructions on how to join the 3 coils together so they operate as a single unit? My current balances are designe ... (cont.)

Balance Assembly and Tilt Latch

The spring is labeled with #4.0, 35", and a code that appears to be PA__2322, with the underscores illegible. I need to replace the balance assembly including spring and cover. I potentially need to replace the pivot shoe, as well. I also need to replace the tilt latch assembly. I have included a pi ... (cont.)

+2

Simonton Coil Triple Support Replacement

Window Stkr: H-R25-48x80, Series 40-17 Single Hung. No markings found on orgnl part. Holds 3x #4.0 35" P coil sprngs. I added captions to pics of 20 yr old, UV baked part based on beam caliper & quadril paper 4sq/inch. Seems similar to ur 15-205. Asking for verification or other suggestion. ... (cont.)

+2

Tripple coil spring window balance replacemnt

Can you please help to identify the parts I should purchase? Thanks!

Simonton Windows. #4.0 35" P

5232208

+2

possible coil balance assembly

I have a window number #1002231142. On the actual coil it says: sm 6 d 8 23:48 35" I am looking for this part. I think it has 3 coils in each assembly. Also do you have a video on how to replace this specific part on this window? Thanks!

+3

3 spring coil balancer

no part numbers or manufacturer seen. I included a photo of the sash where it comes out in one part from the face and one part from the opposite side. I just need to make sure I get the right part

Coil Balances ID

These are photos for Simonton windows new in 2005. The coils have have 3.0 on one and 4.0 on the other, so I'm assuming they are 7lb, 2 coil units. The dimensions on your series 140 look correct. It looks like you could use a single coil replacement of the correct lb instead of a 2 coil. I have 2 wi ... (cont.)

+8

Simonton window balancer

Could I get help with a replacement part? The window was made in October 2006

Replacement parts for Simonton window coil?

Hi - I think I have figured out the other parts I need, but I am not sure on what coil I need for this triple coil replacement. So far, I got the covers (15-205) and the pivot shoe (15-199). On it, the coils says #4.0 35. Does that mean this one: https://www.swisco.com/4lb-Series-165/pd/Series-16 ... (cont.)

Window balancers

Window weight is 17.6 pounds. The part does not have any numbers Need two window bouncers are left and a right for bottom window. The size of the window is 28 x 32 1/4 no name on the window.

Simonton double hung window parts

Please e-mail to me part numbers of replacements of pictured window balancers. Thank you

Replace window balancers

3/8" wide with (2) #4 35" and( 1) #3 35" each side. Need enough for 3 windows. All parts. Thanks

+1

Coils

The coil support have "3/8 dual" written on the inside. They don't look broken. I believe the coils broke. They have #6.0 35 Printed on them. I don't know if I should buy coils only and figure out how to assemble them with the support and the pivot shoe, or if I should buy all these pre-assembled a ... (cont.)

window parts

Hi I work in maintenance in apartments and i have multiple windows that wont stay in place and have broken parts. i have attached a photo with all parts that i need . thank you!

Replacement window coil balancer

I have broken balancers on all my windows. Window are Simonton installed in 2004. Window weight is 21 lbs. pictures are from the right side. When I removed the left side it a total of 3 coils. If I am able to buy new balancers for each window, will I need to change the pivot bars that are attach ... (cont.)

Series 140 Quick-Tilt Balance Quote

I have a Simonton vinyl tilt window from 2004 with two broken balancers. I found one of the three springs inscribed with #4.0 and 35". I'm not sure of your parts will fit. I can send pictures if needed. I will need at least two balancers but will check my other windows before I place an order . ... (cont.)

Balance replacement in tilt window

Hello, I have tilt windows at my house. The balances need replaced. See the attached pictures. I had 3 coils together on each side. The coils have printed on them #4.0 35" P. I was hoping to order one of the 140 quick balances that are already together as one unit, but I am unsure which weight to ge ... (cont.)

+2

Triple Coil Balance System

It looks like I have a Triple Coil Balance System for my windows.I need parts for 10 windows, of course, entire works for both sides, assembly, coils and shoes.It looks like I have a single hung vinyl window. Sending two pictures of the shoe, is 1/2 inch thick........3/4 in wide.......1 3/4 ... (cont.)

+2

Need window parts - balance spring assy and shoe

Pics attached. Shoe measures 17/32 (.53") thick x 1.25 wide x 1.5 high. The spring assy is disentegrated and can not measure it. Window is under 30#. Please recommend replacement PN Thank you Jim

Viewing all customer Discussions for: S165-4 4 lb Series 165 Egress Coil Balance

Viewing all customer Discussions for:
S165-4 4 lb Series 165 Egress Coil Balance