Viewing all customer Discussions for:

15-150S 1/2" Coil Single Support

Photos are both sides of the upper half. Is that enough to identify? Spring is 1/2" wide. I think the only numbers on it are patent numbers but here they are: 5.232.208 5.365.638 6.584.644 B2

I broke a coil spring support removing from the frame. I would like to get a replacement. I have a 15-177 pivot shoe and an S152-8 coil spring. Thank you.

Hello, I have a window that has tilt glass in it and is double hung in a bedroom that when you open it, it comes crashing back down. I believe this might be a balancer issue? Attached is a picture from a good window that works fine. Are these plastic pcs. what causes the window to stay up? If so, w ... (cont.)

I need the "balance" assembly part for MI window (vinyl) up/down model. The window is single hung model. The model is called 350 homemaker series according to MI. The broken coil on one side does not hold the window in up position. The window pain size (movable portion) is about 32"x23"Note; on ... (cont.)

H-R35-48x72 Series 325-324 double hung PAT. NO. 5,704,165 PAT. 5232208 #5.5 35"

The spiral balance spring in my double hung window snapped. It's a replacement window from 2007. Don't know the manufacturer; no visible signs of who the manufacture is on the window or sash. Attached are pics of the part installed and removed. Hopefully you can help.

Hello; I am trying to identify replacement parts for the coil and lock shoe (for double tilt window) that are broken on both sides of the lower window. I cannot identify the stamp on the broken coil, but the window weight is aprox. 15 lbs. Based on the previous posts and looking at your parts, I hav ... (cont.)

I have 3 different size windows, no stamp is on the coils. They are all vinyl Double hung Tilt windows 46 x 47 36 x 53 24 x 36

Hello Would like to know the availability of a set of these balancers. The window is @30" wide by 40" height. Thank you

I don't know which part to order to replace the coil and the part on the right of the picture

The following Markings exists (On the Front Left) Patent #'S 5.232.209 (On the Front Right) 5.365.638 6.584.644 B2

Need to replace this coil balancer. (Do we ever replace with spiral balances?) Window is a double hung, American Craftsman. Coil holder reads 9.0 lbs I don't find a T ended coil in your catalog. Need all parts, 2 sets. Thank You

Broken window balance. Window installer has gone out of business and I'm trying to find a replacement part. Patent #s listed on part: 5.232.208 5.365.638 6.584.644 B2 4.610.108

Marvin window double hung tilt window. They were installed in 1999-2000

I have the same setup as shown in this picture and I was wondering about the two covers. Does it mean that there are four coils springs and all four of them are connected to the pivot shoe?Thanks,

I have returned various window parts due to incorrect product selection. To further assist me, I would like to ship samples of my broken window parts for someone to examine and then tell me exactly what I need for proper replacement. Please advise how I can do this.

The company that installed my BF Rich windows is no longer in business and neither is BF Rich from what I understand. I need to fix my bathroom window. Springs on both sides have broken. The plastic square piece with numbers on it has patent #'s 6.232.208 and 5.365.638 and 6.584.644 B2. The spring i ... (cont.)

Window pro s 16csfr1201ans1z971-1984. The only info I can find on window.

I have determined it to be a 160 series, but I'm not sure if it has a 6 or 9 stamped on it to chose the correct one

I just wanted to double check before ordering. The photos below are from a BF Rich Cabernet double hung. (the unbroken side). Looks like 6.5#/35" The S160/165 have the same T end. The other parts appear fine.