Viewing all customer Discussions for:

15-205 3/8" Egress Coil Triple Support

The first two pix belong to window 1. Needs plastic spring cover as do many windows. The last three show window 2 that show broken spring, cover that need replacement. I am looking for part numbers to order for these and other windows. Thanks Mark

What is this piece called and can it be replaced? Windows are single hung.

Hello!I'm looking for a replacement balance for a GA vinyl tilt window. The window is single hung double pane. The approximate total window dimensions are 42"x70".Thank you, Patrick A.

I am wondering how to replace these springs that are housed inside the window under a plastic casing. There are two per windows to assist opening the windows.

Plastic slide that holds soring in place when moving up and down. Picture is left side, right side one cracked and bottom that holds screw in place has cracked off.

I need 2 each of the pictued balance coil sets with the covers. The coil are 4#.

To whom it may concern, Do you know where I would go to buy this Alliance part? Thank you! Yafu Guo

I need triple coils identified I have uploaded Pictures.

springs are marked #4.0 35" track is 1.25 x.50 looking for assembled cartridges need for 4 windows

I have replaced both triple coil spring balances in my double hung window and it still will not hold open, I have noticed that one of the pivot shoes is a bit loose, could this be the issue? I used your videos and parts that were recommended to me, attaching picture of parts ordered/ used... ... (cont.)

My window does not stay up. When I hinge my window out ,I see that on the right side the white piece is broken. I was told this Covers the balance and needs to be replace. On the window the sticker says Moncton Wintons 0608171400 8/17/06 A10 other numbers listed are 8308705/03 unit: 47 5000 59 5000 ... (cont.)

Hello, I was at The Home Depot today and the told me you guys were the ones to contact. I have a window in my house that won't stay open. Coil is broke. And I do NOT know the window brand. The coil housing is rather large and looks like it is going to be a bear to fix. Any suggestions you have wo ... (cont.)

The cover of coil balance for my home is same with Macungie from PA 18062 in this discussion. I am going to purchase it in the near future. Could you please let me know the difference for 15-204 and 15-205? The photo of 15-205 looks like more match to my home window's cover of coil balance. ... (cont.)

I am needing these replacement parts. Is this enough information to be able to determine what parts that are need? I have a customer needing a coil spring (5232208) that is 3/8" wide. One for a 4 lb x 35" window. And one for a 5lb x 35" window.

Hello I'm looking for some Milco replacement parts this is off of a single hung window. Thanks

I'm looking for coil/balancer and/or any other parts associated or needed for this repair.

Single hung GA vinyl windows. Double coil springs, pivot shoe, and coil support. Spring is 5#, 35", and is 3/8" inch wide. Other marking on spring appears to be the number 5232. Shoe is 1 1/4" wide and 9/16" thick. And a coil support.

I need to replace a few sash coils like the one in the picture. The coils are encased two pieces of white plastic with the letters g and h with four total screws.

I wanted to find the number on the coil balance today, but was very confused when I saw 3 coils on the one side of the window where the coil had let go of the shoe. These were all parts that came off of one side. Now I'm not sure what to order. Help?! Thank you Karen

Need to replace this part on two windows. There are two on each window. Sticker has no brand name. Series 7000 SH/J channel H-R30 H-R40. It is about 4 1/2"L x 1"w x 3/4"D. Roughly. One screw.