Viewing all customer Discussions for:

26-068 Pivot Bar, 3"

Off an old metal frame window sash. Any idea?

Tilt out window by Alcoa Need to replace the bottom part somehow.

Tension springs hinge parts

The coils have w6.5 35" and the other has a number 4 on it, it is a half inch wide. I will new coils,coil supports,pivot shoe and pivot bars if required.

Hi. I recently dropped a vinyl tilt window sash and broke a corner. (This happened while installing replacement spiral balances and pivot shoes.) I'm hoping that the attached photos will give you enough information to identify the replacement corner part(s) I need in order for us to complete the rep ... (cont.)

Hello, I have several windows whose latch has broken. Additionally, the roller track which holds the window in and allows it to slide is also broken. Thanks in advance I was wondering how I'd track this down!

Hi there! I am looking for replacements for these window shoes. I think this is only a portion of the plastic part, as the rest of it is still in the window. These are Sears windows, approx 19 years old. Cannot locate any numbers or markings.

I'd like to order a window balancer and a shoe for my window and an extra shoe and some other parts, could you tell me what kind of shoe is in the picture and a balancer, thanks

As you can see I need a multitude of parts. 6 tilt pins. 4 left tilt lock/releases. 4 right tilt lock/releases. 2 single spring balance/shoe assemblies (blue). 4 double spring assemblies (blue). DBA StoneRidge Construction. I've installed replacement windows, mostly Alside, for over 30 years. 100's ... (cont.)

The parts removed from a 'Certain Teed' window. On the spring where is mounted with a screw is marked 335 and 336. On the "L" shape plastic bracket marked "Certain Teed' Measurements are 1 1/2 X 7/8 for both parts without the spring. Spring width 3/4.

The pivot bar measures 2 7/8 inches overall length 5/16 of an inch wide inch and 7/16 to the first hole and 2 3/16 to the second hole. The windows are 36 inches wide by 36 inches tall and manufactured by soft lite window company. The coil housing has a number on it that says 6R. It also has a paten ... (cont.)

Hello,Please see the pictures with dimensions. I have a couple windows that need new pivot lock shoe tilt spring. Also the tilt latches as well. Do you sell any that will serve as a replacement part for either of these items ?Best Regards,Jake

I have Phillip windows single hung I ordered #26-378 3" did not work can you tell me what will?

We must replace a broken pivot bar. I've attached two photos of an unbroken pivot bar. We don't see a name or part number on the pivot bar. Can you sell us a replacement part that matches the part in our photos? Thank you. Ed

The picture is of my old sash pivot bar it is 2 5/8 long 5/16 wide u shape 3 holes one closest to pivot shoe is 5/8/inch next one is 5/8 back from there last one is 1 3/8 from first hole. Pivot shoe looks to be a 15-087 and stamped on spring is 15v then a different type of 6 on it also. Pivot shoe n ... (cont.)

2 inch long 5/16 wide 3/16 high (not rounded has a flat top)

The tilted part of the window is all vinyl weighs approximately 20 pounds. The right hand top tilt latch is damaged. The Pivot bars were both rusted out they are 3"long. The pivot shoe was measure at 2" in length,1¼"wide, and ½" thick. The spiral Balance rod was measured at 3/8wide and 34" long. It ... (cont.)

Hi, i am trying to locate a replacement pivot shoe for upper tip in window . Cant find mfg.sticker or model # on any of the windows. Part in attached photo is the broken shoe. It measures 1 inch wide, 2 inches tall, 3/8 inch Depth (thick) ty

Please help me find parts that will work for this window and provide pricing. my mistake the diameter of the rod is .560 inch and is out of round. thank you

Good afternoon. Looking for some assistance in identifying metal bracket attaching bottom of window to window pivot shoe. Thanks in advance for the help!