Viewing all customer Discussions for:

26-116 Window Sash Lift Handle

Can not find any brand on any of these old windows. I have 9 that are 35' x 36" and they are in various stages of broken. I'm looking for --36 handles (each window takes four) the screws are 3.5 inches apart on a 4" lock --18 locks mechanisms (each window takes two)the screws are 2 inches apart ... (cont.)

Looking for a replacement for this pull with the same screw-to-screw measurement so I don't have to re-drill. The pull itself is 3" long but only 1 3/4" between the screws. The latches on the window are Nuprime, so perhaps these are too.

Center Hole to center hole is about 2 5/8 apart.

We have an Anderson screen door. The top glass lowers to expose the screen. The handle cover broke off first. We used it this way for several years. Now the plastic piece in the middle has broken and it is very difficult to use as is.

I had previously ordered handles. But, the distance between holes are differently sized. The holes of the lift in the pics from center to centered are 3 5/8" apart. Also, the handle appears to be only about 7/16" deep.

Part 26-116 These windows do not already have lift handles. Can I use install Part 26-116. If I can what screws do I order? Thank you Tom

Could our 26-116 window lift work on your window? Have a look and let us know.

Need 16 handles

Hello, We are looking to identify this bar that snaps onto the bottom of a double-hung window. This piece is meant to provide a grip so that the window can be slid up. Thank you for your help.

Hi Please help me identify following parts: Window Handle looks Like 26-116 Latch i couldn't find match Brown Crack without Handle looks like 39-066 Black Crack with handle i have no idea... Thank you!

Screen door corner piece. Help.

Help ID part

Please provide nomenclature and part # for these double hung windows

Do you have this window part? We just received installed a few other parts ordered from you and they were great. Very satisfied with the product, service and your website. Thanks, Robert

Screw hole 2 inches apart. Where can I find replacement s.

This part is one of 2 on each of my sliding windows. They help to open and close window. We moved into our home 2 months ago and all of them replacing. I am needing 10 in all since 12 of my 17 have this feature. Thanks for your help. I was told my windows came from Pella .

Hi, I was wondering if you could suggest a quick fix for this vinyl window problem. The best solution we can come up with to remove the remaining "fin" and replace it with your part number 26-116, Window Sash Lift Handle, and mount it vertically instead of horizontally. We are putting this house u ... (cont.)

I do not have pictures of the lift rail but it is white and the demensions are 1/16 x 3/4 x 28 1/8". The attached pictures are for the glazing strip. The piece itself is 24 1/2" long.

Hello :) CAN YOU HELP ME LOCATE THIS PART? (See photos) (Also included pictures of the wrong part below :) I ordered the 26-116 and it did not work for me. The holes do not line up. Thanks so much for your assistance!

Hi Swisco.com Would you please see attached pictures? Do you sell these window parts? Thank you and have a nice weekend, Edwina