Viewing all customer Discussions for:

15-211 Pivot Shoe, 17/32" Thick

Hello, I recently ordered replacement 770 channel balances. Now I need to replace several shoes. The 2 shown are not an axact match - Hopefully upgrades. Can you please identify the part # I need?Thank you!

I believe I found it at DK Hardware: Brixwell 85-5004-XCP2 Pivot Lock Shoe .530 Thick 2 Metal Prongs hwp968

Thank you.

The center line is 7/8". The part that slides into the ballast end is 5/8".

Spiral balance: tip looks like black; 3/8" diameter; 28" long:Pivot shoes: 15/16" wide; 2" long without legs.I need a charging tool for this job. What model should I buy? What are the models for the spiral balances and pivot shoes?Thank you. RogerAdditional information: The thickness of the pivot sh ... (cont.)

Hello, I have these old windows and would like to replace the balance mechanisms on the side but am having trouble finding the parts. Some of the windows won't stay open and some are just very difficult to open (feel stuck).

I need to order 10 of these please and thank you please help me figure out what they are.

Hello folks, I've just registered but have ordered previously as a guest. You are my go-to source for this stuff! I'm hoping you can point me to the correct pivot blocks for a whole house full of windows (photos attached) this is a heritage home built in 2005. The window frames are vinyl and require ... (cont.)

Hello, I need to know what sash or tilt pin goes with 15-211 17/32" thick pivot shoe part number. my original tilt pin or bar does not match my new pivot shoes(15-211). Thank you so much for your help. I uploaded some photos of my old pin and the new pivot shoes.

Hello, My name is Brad and I'm having trouble finding parts for my no name window. I need pivot shoes. 2.16 x .534 x .976. Looks like the pivoting part is black or gray, and the rest is white. Thank you, Brad

Hi, I have confirmed the Pivot bar = Pivot Bar, 2 1/4" Product Code: 26-297 Looking for pivot shoe and spiral balancer Thickness = 0.544" Length = 2.044" Width = 0.975" Spiral balancer: 22" 28" Thanks.

I am trying to order correct windows Pivot shoes for my single hung tilting windows. House was build in 2006. Pivot size ½ x 1" x 2"high. Thank you for assistance.

have m & w window -- need pivot shoe --will buy balance as well--is their a place where i can go and pickup in my area? or person that will do job?

I have ordered you 26-089P for my "Pacific Industries Windows" and they worked out great. Will be ordering more. Now I need the Pivot Shoe for these windows. The current Pivot Shoe in 2" tall, 1" wide and 1/2" thick. The close I can find on your website is your P/N 15-046. However, it is 1/ ... (cont.)

I received #15-211 pivot shoes, 17/32"from you and they fit fine except slot to accept window pivot is different. See photo. I was able to use old part as shown. Do you have 15-211 type with desired configuration. Thank you.

I need part number for Pivot Shoe, 1/2" thick, 15/16" wide. Similar to 15-046 but 15/16" wide, not 1 1/4" wide.

I ordered 4 Pivot shoes for repair of windows---In checking I find I ordered wrong size pivot shoes. I have enclosed some photos of old shoe in window and photo of side by side comparison of old and new shoe. Measurements of old shoe is thickness .538"----Width .964"-----and Length 1.953". Hoping yo ... (cont.)

Spiral Balance is round with white cover and is 28" long, 3/8" wide and has red tip Pivot shoe is 2" long, 1' wide and 1/2" deep. Will replace mechanism on both sides, just need something that works. Stationary top sash ans pivoting bottom sash.

you have one 1 1/16 x 1 x 17/32. do you have a 27x32 ?

I'm looking for a pivot shoe that has the overall dimensions of part 15-211 but has the wider cam like the one that appears in part 15-015. Does this exist? Thanks!