Viewing all customer Discussions for:

15-212 Pivot Shoe, 3/8" Thick

need to know the part number so I can order

I am looking for balance rods, connectors, plastic covers ect in the attached picture.. If you have them I need to know costs.

Window manufacturer is MWD Series 165/175 Pivot lock Shoe Please see attached photo for part identification. Thanks in advance! My dimensions: Height is: 1 61/64

About 2" x 15/16" x 3/8". Installed in generic single-hung spiral balance windows with no other visible markings. Any ideas?

Hi, Please let me know which pivot shoe most closely matches the picture I sent. Unfortunately, all of them are broken. The dimensions are 3/8 x 1 15/16 x 1. Please let me know if you need any additional information. Thanks, Jamie

I need to know the pivot shoe needed for my windows. Please recommend one that I can use to replace these. I have a lot of them that have broken into two pieces during the years.

Looking for the right pivot shoe. Also the swivel balance that is 3/8 at 30" long and 28 3/4"long. when retraced all the way in. The windows a aluminum single hung tilt outs. Any help you can give me would be appreciated. I looked at your 15-045 but it just didn't look the same. I need enough for 6 ... (cont.)

I recently bought the Pivot Bar, 3" Product Code: 26-068. I also bought the Product Code:15-045 : Pivot Shoe, 3/8" Thick. The two do not fit together. The inside piece that the pivot bar is supposed to fit into is just a little too small. I would like to keep the piovt bar 3" and find another pi ... (cont.)

I just received my order, thank you! the S900-29 worked great the 15-045 Pivot Shoe fit but would not lock and my tilt pivot did not fit it. the 26-361 will not fit on the frame I will be ordering many more (16) S900-29 green tip since they worked fine but would like some standby parts. HAPPY ... (cont.)

About 2" highx1"wide x 3/8 thick Pin hole about 1/4" wide. Thank you

My Pivot shoe is sized like your 15-212 but has a white center for the pin. Does the black center have any meaning I should know about?

I ordered and received the 15-045 Pivot shoes for the Keller windows I am working on. The shoe is perfect size except for the slot that accepts the pivot bar. It is a little too narrow. (I made it work by taking a pair of pliers and squeezing the pivot bar to make it slightly narrower) The Pivot ... (cont.)

I need 4 of this window part shown in the attachment. It is 3/8 " deep, 3/4 " wide and 2" tall. Please let me know what part I need to order.

Good afternoon! I would like to replace qty 2 spiral balances for a tilt window. The diameter measures 3/8". The tip is blue. As shown in the attached pictures, the length measures 19 1/2"; I measured both balances to confirm. Which size should I go with? Also, I am replacing everyth ... (cont.)

I need your help on this and I have attached three pictures of what I need. Sometimes it is hard matching these parts up using pictures alone. What I am looking for is 35 inches long and is a "ribbed" piece using a block and tackle operation. I measure the channel on the old piece and it is exact ... (cont.)

The length of channel springs is 35"

I need a 3/8" thick pivot shoe. It looks like your number 15-045 should do the trick. You recommend the 900 series spiral balances which are 3/8". I have 5/8" balances now with a black tip. The window weighs 13 pounds. My question is should I use your 900 series balance and what tip or can I use you ... (cont.)

The pivot shoes I bought (15-045) fit perfectly in the track and attach to the S900-29 Spiral Balance just fine. The issue is that the window will not fit into the shoe. The metal bar at the bottom of my windows that slides into the shoe is too big. I have included 4 images with the meas ... (cont.)

could someone help me identify this part for replacement? they measure 15/16 wide, 1 15/16 tall, 3/8" thick and the hole where the window sash connects to it is 3/8 wide and just under 1/4" tall. also my spiral window balances are 3/8" diameter and are all white )not bare metal is there a replacemen ... (cont.)

I am trying to locate a pivot shoe for my windows. I was told that they are possibly Capitol 740 series. The pivot shoe that I ordered from your company was a perfect fit except for the hole that the window attaches/pivots on because it needs to be larger. Do you all have something with these measur ... (cont.)