Viewing all customer Discussions for:

90-286 Window Sash Lock, 1-7/8"

I'm looking for 2 windows locks. I'm located in Alberta Canada. Thanks in advance.

Needing parts for fold out Champion window. Photos enclosed. Need two each.

Can you help me to find a replacement. About 22 years old. Fastener spacing is different on current offerings at Home Depot.

Does the handle swing 180 degrees to retract the lock cam? The locks we have now leave the handle pointing outward and that interfers with the mini blinds going up and down. Hole spacing is not an issue for me, I'm good with drill and fill (old holes) work. The mounting surface is 1 and 3/16" wide. ... (cont.)

Hello, I am looking to replace my yellowed plastic window latches with white metal latches. The latch mounting holes measure 1 7/8 apart and the other side measure 2 1/16. 90-286 and 90-279 seem to fit. Are there any other measurements to consider?

Will 90-177 work with 90-286

The glass on the window says: IGCC CBA IGMAC CIG-2 HS 2-97 Other than that and the "Pella" marking on the latch, I can't see any other markings.

Unfortunately I can't find any identifying marks on the latches or the windows. I'm sure there is something somewhere, but I can't find it. Even tilting the window out doesn't reveil anything. There are pictures of the 2 broken ones. One the handle broke but the turn 'thing' works with a pair of ... (cont.)

We purchased these in 2013. I have close to 300 windows and the locks are breaking. Where can I get new ones. Thank you,

MW window latch is UV damaged and cracked. Mounts on an angle instead of flat. Would prefer a metal replacement with bulk pricing to replace all latches in my home.

I need new window locks and have included 4 photos with the manufacturers name and other label. Plus a photo of the lock and one with the tape measure.Thank you for your help,Pat

Need replacement cam latch for Pella sliding window. Screws holes 2-1/4" apart, 11/16" in from inside edge. Overall dims 2-3/4" x 1-1/8". Color: whitw. Quantity: 1. Left Hand.

I am looking for 1 window lock and the spring/coil on either side of the window that holds the window up

I need to find a replacement for this window lock in white.

Do you sell the lock and keeper for this window. What company actually manufactured this window? The manufacturer code is ELL-1. I'm assuming the 1 means single hung.

I am looking for sash locks for windows that have a narrow area to mount the keeper. the lock at its widest point looks like 2"3/4 outside diameter, the mounting holes look like 1"7/8. Have attached pictures of one I found in town but that company is not around any longer. your help is appreciated ... (cont.)

The only information I can find on my windows is the following- Series 7000/7100 SH AAMA/WDMA/CSA 101/I.S.2/A440-05 I have also attached a picture of the latch, which is 2 7/8" x 1". I am looking for pricing, availability and whether they can be returned if they don't fit and different ones ordere ... (cont.)

Hole distance is 1 7/8 inches Piece width is 1 1/4 Need four - windows at Beach Home.

We do spray foam insulation and got over spray on these windows. We need 14 of each shown in the picture. Also sent pic of the window label in case that helps!

Need 6 of these