Viewing all customer Discussions for:

26-175 CertainTeed Pivot Bar, Pair

we need this replacement part for a Certainteed window. 103-2 is stamped on the back. Dimensions are 3 1/4 total across left to right. 1 7/8 across the small side prior to the vertical bar. 2 3/8 across the longer side after vertical bar. It is 7/8" tall at the vertical bar. it is 5/8" wide. On ... (cont.)

Hello. I need to replace this pair of metal bars from the bottom of my lower sash. Both have broken and bent. It's a very large double hung Certainteed Bryn Mawr II window. Thanks for your help. -Joan

This is my second time to order and still not exactly the right part. The ones you shipped are more narrow and a bit thicker. These are Certainteed windows. Appreciate any input. Aloha

numbers/letters on coil LA406 on plastic AI86160 need the hardware for the window (as shown in photo) also

Certainteed vinyl tilt window installed in 1998, no markings or numbers - need correct left and right pivot barOrdered replacement pivot bars (order #1230689). They were not the correct ones. Everything was correct except the size of pin that goes into bracket in window track. Photo 0317 shows diffe ... (cont.)

Please advise me on the parts I need. The window is 15 pounds and the pivot bar is broken as you can see in the pictures. This the part that is on the bottom of the window. The spring is 3/4" wide. There is a stamp on the spring, 1C J

Looking for replacement pivot arms for a Hancock vinyl window.

The pivot bar pins seem to be offset indicating they have a left and right side. The windows were manufactured and installed around 1998. Do not have any markings on windows except brand name curtained and existing pivot bars have no markings. The bars are 2 1/2 " long corner type. ... (cont.)

Hi, I have a certaineed window that I need pivot bard for but not sure which one to order. Please see attached pictures:

I'm looking for 2 pivot bars for my window. The marking I see is "103-2" . Photo is attached.

The window was manufactured by Viwinco 12/11/07. The numbers on the sash tag are: 47780260000001 071214BM816 (Bryn Mawr window) The pin has a long, rounded point Thank you!

We are in coastal San Diego. the salt air seems to have corroded the stub on the outside of the short arm of this piece. I unsecrewed the bracket from the bottom of the upper sash. That sash slid down and would not remain in place.Michael

I need 4 pivot bars 2 left 2 right. Pivot bar zinc die cast 2 3/4 LH. Isco. Certainteed vinlPart number 532011 discontinuedReplacement part 532058 right 532059.leftJames

pegs on bottom flange broke off in swivel. pics show length, width and depth of flange as well as the peg portion that broke off. Flange is installed with two screws. one on bottom; one on side(I have screws) I need two these flanges, they both broke Please contact me if you need further info. ... (cont.)

It also says "certainteed" on the sash lock. I hope this is ok it is all the pic I have.

Product code 26353 is this the same item since my existing components are offset Center which would mean a left and right

The Pivot bracket on the lower sash of my certain teed window snapped at the angle. Temporary fix is JB Weld. The material looks to be some sort of cast.

Hi,Looking for upper sash pivot bars (and also top of sash tilt locking mechanisms) for certainteed windows? product info shown in one of pics.Thanks!!Leon

Hi there,I am trying to find a replacement part for one window in the house. The window is a Bryn Mawr double hung vinyl window, installed 20 years ago. The top sash has 2 pivot bars on the bottom, that lean on the inner channels of the frame and help is slide up and down. One of them, the right han ... (cont.)

Need 2, one left, one right