Viewing all customer Discussions for:

26-241 Pivot Bar, 3"

Associated materials incorporated impact windows installed 3/19/2008Sash hardware to attach window. To frame, plastic insert with ring where window attaches and tilts out for removal.and aluminum stem to attach sash into this plastic fitting4 windows have these broken partsThank you Elmer ... (cont.)

Which one do we need?

Looking to replace some broken pivot bars like the one pictured. I am purchasing shoes #15-177 also. Measures 3 inch total, 3/16 thick,5/16 wide,1 3/8 from end with hook to first screw hole,1 5/8 to second screw hole

I need two of each of these parts. The only number I could find on the balance is 440.

3" long they all have different numbers 3,4,8 on the ones I checked. The broken one has a 4 but they all look the same. The windows where bought from ABC supply in 2009 I think.

I'm looking for replacement shoes for my Alside windows. I have attached pictures of the shoe which is 1 1/4 wide 1/2 thick, 1 1/4 tall. Also is a picture of coil balance end with hole connection. The window has 3 coils on each side of sash. The plastic shoe connection broke where coils attach. Seem ... (cont.)

Hello, I bought a house that had windows but no info on them. From analyzing the windows, I was able to determine they are Acan from 2010. I am looking for the silver piece detailed in photo 1. As of now, I am not able to raise the window because it won't stay in place.

I am pretty sure this is a 3/8 inch egress coil triple support it's an inch and a quarter wide by 4 1/2 inches long and looks similar to your product code 15?205. I also need a little metal bar that goes down in the bottom of the window as the Pivot arm

Can you tell me what pivot shoe this is, If you have them and how much they are. I included a picture of my pivot bar which I am also needing many of.

I need to supply replacement sash balancers for my customers vertical sliding windows. The manufacturer is unknown, the windows were installed in the late 90's each sash is 32" wide and 22" tall.

The pin is 3" long unsure of make of window.

We are in need of balances, shoes, & pivot bars for 7050 MI windows. We previously submitted a request but lacked pictures on the balance piece needed. Please contact us if we can get these parts through your company.

this post goes into the side track that is held up and down as needed currently with the broken piece the window doesnt stay up.

What is the name of this part? Thanks

the part i am looking for is a hardward (metal) that holds the bottom of the window into the sash so the window goes up and down. Do you sell this part (see photo). The part in the photo is broken and is only about half of the full piece of hardware Ken

The small piece shown prevents a single hung window from sliding down when open. These metal pieces are breaking on what may be Milgard windows. The uploaded pictures show a window bottom with an unbroken piece in place that works. The broken piece is shown half still attached and the part that brok ... (cont.)

Window sash balance pivot bar 6984

Pivot pin

Hello, I need 1 left & 1 right balance for the Simonton window shown in the picture. I also need 1 left & 1 right tilt pin for the same window but I don't have a picture. Is it possible to determine what tilt pins I need with this information or do I need to send pictures? Thanks, -Randall ... (cont.)

There are no names or numbers on these windows, but it looks like the 3" bar that you have will work based on the dimensions in the photograph I uploaded.