Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

These are in a low income rental... so not high end windows. The latch is the slide in from the side type. My example piece is broken on one end.I need 8 right/left sets initially. If they fit I'll order many more. ...rehabbing a small apartment complex. Currently rehabbing 4 units. Will need 8 latc ... (cont.)

Hello, I am in need of helping identifying the replacement right and left tilt latches and pivot shoes for my single hung tilt vinyl windows. The existing tilt latches match the dimensions of part 26-244 but the design of my latches are different. Pictures below. Also, for the pivot shoe, these ... (cont.)

Need tilt latches for up to 10 windows both left and right. No identification on the windows, but have hand written notes saying simonton.

Looking for part numbers for parts photos attached. The cam is 1.25" Wide, 0.5" thick. The spring is stamped with "30B" and has a single screw hole at the top. The latch is approx 9/16" wide and approx 2 5/8" long (on side that inserts into window). Looking for both left and right. Thank you! ... (cont.)

Hello, I need help with part numbers and advice on how to install the parts for two of my windows. First, I think my windows were made by Traco and I am hoping they take generic parts? I need all new tandem coil springs for each window. They have the Blue screwdriver tab and the spring had a #6 or ... (cont.)

Harvey window, right side tilt latch. Body is 2 5/8" long (not including the latch that sticks out), and about 5/8" wide. The back is stamped "R 27".

I'm looking for these replacements parts for quaker windows. I have included pictures. Please advise if you have part numbers and where I can purchase them at. Thank you Mendy

I thought I'd send you these pictures. See if you can tell me exactly what I need to make sure I get the right part.

Hi I'm going to replace all the balances and tilt latches in my windows. I've added pics of the latches with measurements visible, hopefully that gives you what you need. For the balances, they are 28" long and 3/8" diameter. The sashes weigh 18 lbs. The original tips are all broken off or missing. ... (cont.)

Have an old double hung window, production 2001, with broken pivot lock shoe, sash weight assembly, and sash tilt locks. Model number is hard to read but can read 'F0327' and '2CWP'. Broken pieces are on right and left side of bottom sash preventing sash from sitting in track and locking in place. ... (cont.)

lock has patent number 5,139,291 on back and 7C 2 3/4 " long, 11/16th wide, 7/16 " high Slides into the top rail of lower sash. Need RH and LH parts

Would like to avoid returns and delays and so I'm submitting these photos. The white part appears to be a surface mounted tilt latch. The second photo is of a pivot shoe that is in pretty bad shape. It's attached to a triple coil balancer, and it measures 2 in long, 3/4 inch wide and 1/2 inch deep. ... (cont.)

Hello, I need to order some replacement window latches, but am not finding an exact match thus far. Can you identify what latch this is? Thanks! Bobby

IMG 0726 This is the latch to secure window need 3 on each side IMG 0727 Need plastic covers 4 for Lt side of the window and 3 Right side IMG The whole 3 coil kit including plastic cover .

We are trying to replace several latches for the windows in a house we recently purchased. The piece that holds the window in place has broken on many of the windows. We are having some difficulty matching the part. I have attached some pictures. If these pictures aren't sufficient, please just let ... (cont.)

Need this tilt windows lock

I have 20 year old vinyl windows and the tilt latches are starting to break. I need to find replacements and have not been able to find the exact replacement. I could not find any name or part numbers.

Hello, I have several builder-grade windows that need their window balances and connecting hardware replaced. These window balances measure 34 inches in length. Also, the spring-loaded clips that allow the window to release inwards. Any help would be appreciated.

23" window balance. Stamp on back is 22-7 1/2" wideI also need a pair of 18" balance same styleAnd I need 20 balance @23"

Corner Latches ... Arizona Sun has broken my corner latches . is there a way to replace them , or do I need to install top once Thanks!