Viewing all customer Discussions for:

15-001 Channel Balance Shoe, 1-1/8" Depth

I have Alenco alum. windows and need to replace a pair of block & Tackle balances. The channel is 31" long and the following is stamped on the back of the channel;30DS 38. Can you help me idenify the top and bottom pieces? Thank you, John

I've attached 5 pictures of the balance I need to replace. The metal portion is 29 7/8" long, 9/16" deep x 1/2" wide on the narrow side. Please give me availability and cost. I will need two...one for each side.

Can you please from looking at the attached pic what parts I should order for my broken channel balance windows. The length of my channel is 27". From looking at the series 380 and 385 it looks like I have a 19-905 top with 15-002 bottom? Thanks, Vio

Dear Swisco: I need to order two 2740 channel blocks completely assembled with balance top 19-005 and balance shoe 15-001. Non tilt window, 1/2 inch. How can I order this configuration? My bottom shoe is not flared like Series 380 or 385. My bottom shoe has the same measurements as your 15-001. ... (cont.)

I have two balances that need replacing. They are stamped "233". They are 1/2" chanel and 24" long After looking at your premade balances It looks like they have a 19-002 top and either a 15-001 or 15-002 shoe. I can't seem to see any difference between the two. My shoe looks similar but just ... (cont.)

I need several replacement Caldwell window balances. 1/2" X 30" the only markings I can find on one of them is " 29 4 JP CALDWELL". Thanks, Ken

Attached are 2 pics of replacement channel balances I need, not sure of the exact top and bottom shoe. Looks like 19-002 and 15-001 or 002. The number on bottom of balance is stamped 1620. 17in.

Which balance do I need? 28" 2730 top 19-005 and shoe is a 15-002.

I need to replace a 1/2" channel balance, but cannot find one that exactly matches. This is for an Atrium non-tilt window. The upper guide has wings, but the lower guide does not. See attached photos. The metal channel is 27" long. The stamp on the balance is 26-4 JX CMC 7. Can you please help? ... (cont.)

Hi- I have 10 windows which need balances replaced. I can't see the difference between the 15-001 shoes & the 15-002 shoes. Our balances are either # 351 or 390? 22 inches from end of metal to end of metal. I also want to replace the clips on the metal sash, some are broken, buy?? How the he ... (cont.)

I need help identifying the right window channels, I need approx 20 channels balance mechanism's

The Caldwell Channel balance has the same dimensions and looks very much like your 13" channel balance. It is 9/16" wide (what you say is called 1/2") and it is 5/8" deep, with hemmed channel edges. The top and bottom stops look just like the picture for your S351-13 None of my windows have t ... (cont.)

Hi I end to replace 2 sash balancers that have following imprinted on them "12 5 KR CALDWELL" The sash weighs about 16 lbs, and the channel is 13" long by 1/5" wide (9/16" actually). Based on this info, I believe I need 380 series balances. However, I am not 100% sure about the top and sh ... (cont.)

HI, I need 4-9/16" channel balances for 2 PGT non tilt windows. Ive attached photoes and it seems they have a 19-005 top and a 15-001 shoe (the top seems to be grooved on the back side). The balances are 29" long and the sash weighs 23.6 lbs. I've ordered other balancers from you in the past, and w ... (cont.)

I have Jordan windows in my home that have broken window balances, the windows don't stay up on their own. The marking on the balance is 2830. The balance itself, without end pieces measures 28 15/16 or 29in. The balance and the end pieces measure 29 7/8's. It appears it is 5/8" wide. What ... (cont.)

I'm attaching four images of sash balances from one of my Radco Windows. I would like to order replacements for these. Could you please help in identifying what I need to order as replacements? As the fourth picture shows, this is a 6' x 3', non-tilt window, the sash is 3' x 3', the channel is 1/ ... (cont.)

My existing channel balances are stamped 2730%, measure 9/16" wide, 28" long. Looking at your website, it looks like I have a 19-005 top and 15-001 or 15-002 shoe on these but I didn't see that combination shown in the 1/2" balance section. I am including some photos that I hope will aid in the iden ... (cont.)

Howdy, am (like everyone else) trying to determine which replacement balance I need. Length of the metal bar is 28". Embossed are the letters DB 102 2730 (perpendicular to the first two lines). The top appears to be a 19-005 - the measurements match, though there's an extra rib not shown ... (cont.)

I need to replace some window balancers. The number printed on the window balancer is 29 5 CW CMC 10 and the other window balancer is marked 29 6 CW CMC 10. The metal channel from end of metal to end of metal measure 30" on both of these window balancers. Also, the bottom plastic guide measure 1 1/8 ... (cont.)

I have 4 28" long 1/2" wide 2040 channel balances from 20 year old Allenco aluminum windows that doesn't exactly match any of your pictures. Which one would work?