Viewing all customer Discussions for:

15-001 Channel Balance Shoe, 1-1/8" Depth

I am having hard time identifying my window balance on your site. The length is 29", width: 1/2", depth: 9/16". The balance sides are hemmed. The letters on the back are marked as: 28 3 FU CMC 4. I am including a few photos so that you can help me identify which one I need. I would appreciat ... (cont.)

Series 351 looks like the good start. The top of my balance is however winged as in 19-005, Channel Balance Top, Winged. The dimensions of 19-005 are the same as in my balance top. The shape of the shoe in series 351 is the same as mine, however the width of my shoe is approx 1 1/16" which is betwee ... (cont.)

I have the attached pictures of my balance and it looks like a combination of 385 & 390. It also includes the marks "29 5" as well as "BSI" on the channel. Please let me know which one is the correct balance to order.

No markings or numbers on part. Overall length 29 inches. Spring length 13 3/4 inches.

I have 1/2" channel balance with Top 19-005 and bottom 15-002, this is what it looks like with 2740 stamp. I am not sure as i don't see this combination in your selection screen, cl/1_2-inch-Wide-Channel-Balances, please advise so i can place and order. Thanks Sam

I'm looking for a replacement for some window balances in our house. I've attached some photos I took with my phone for a better reference. I've looked through your website but haven't found an exact match yet. Any guidance you could give would be appreciated. Thanks, Andre

I want to buy a pair of sash balances for a single hung window. I would like to buy the entire assembly rather than re-build from parts. The original is manufactured by BSI and the part number is 2830. (there is also an "NE" stamped by the "BSI"). The metal channel length is 29" long. Our home ... (cont.)

Before I place an order, can you please confirm that I need a 19-002 top and 15-001 shoe, based on attached photos? I'm 90% sure, but I'd hate to get the wrong parts. Stamp: 2620 Many thanks in advance for the help. Mark T. (PS - GREAT website - full of info and helpful photos)

Please help me identify the serial # for Channel Balances. It's 33 inches long, 1/2 inches wide. Marked "32 4 EX CMC 7" I am attaching 3 photos. Thanks a lot.

I need balances for 25= year old Alenco window. The channel is 22 inches long, 9/16 wide and 5/8 deep. It has "21 C" stamped on the channel. I replaced a longer version of this one a few years ago that is a little less than 28 inches in length. It has the number 2720 stamped on it and was purchased ... (cont.)

Here's what I think I need, and they don't seem to be a normal stock item: 1/2 inch balances for old non-tilt single hung aluminum windows. Length is 23 inches Sash guides are 18-009 Shoe appears to be 15-001 Top appears to be 19-005 Option 2230 Pictures attached. I'd like to order two to ... (cont.)

My channel balance has a number of 2830Q stamped on it. I believe the windows were by Alenco and made in 1986. Is your balance S730-29 the proper balance. Your site says for "Silver line channel balance S730-29". Just checking before ordering. Thanks. Ron D.

I have MW windows and need to replace a 31" Channel Balance. The stamp on the channel is 30D. I don"t know what part number the plastic end pieces are. DOes that matted as long as the channel is the right length and the ends look the same.

I am looking for top sash for alenco windows. channel_length: 28inch channel_stamp: 2730 channel_balance_top: 19-005 channel_balance_bottom: 15-001 base-series: S100 I am sending pics. I hope you can help

Hello, I have a hung windo in a 20 year old house that appears to have a mix of S380 and S390 window channel balance according to your drawings. The stamped numbers on it are 2130 "C". The top appears to be your 19-005 part number and the shoe is your 15-001 part number. Does this make sense? Shou ... (cont.)

I believe I need either the series 380 or 390, however the shoe and top are slightly different. Shoe 15-001 and top 19-005 is the closest match. Some of the dimensions are 1/16" different.I have enclosed some images, Please let me know what you suggest. The original balance is stamped 2730 and is 2 ... (cont.)

I am needing to replace the balances in my home. The original manufacturer was Kinco. Windows were installed in 1986. Windows are non-tilting double hung. I think I need 390 series w/ 19-002top & 15001 shoe. Does this match any previous requests for similar window. Thank You.

Hello. I need to replace a 1/2" non-tilt channel balance but the top and shoe combination are not among your standard selections. The top looks like a 19-005 and the bottom looks like a 15-001 or 15-003.

I got a 2430 balance with a 19-002 top. However, I am having trouble identifying the right shoe. It's either 15-001 or 15-002. Size 2430 non-tilt 1/2" wide 19-002 top see pictures for the shoe (either a 15-001 or 15-002??) thank you.

I'm ordering S380-24. But, I need to replace a broken top sash guide, too. Which top sash guide is for S380-24? The weight of the sash is 13 lbs. Is 2330 the right option?