Viewing all customer Discussions for:

15-224 Inverted Link

Need to be 28" with these ends.

It is 34 inches long

I spoke with Swisco and they told me based off the information I gave them that I would need custom channel balances. So I have attached photo's and info regarding the busted channel balance. -I need two channel balances -I have identified the pivot shoe as the 15-216 from your web site -I have id ... (cont.)

plastic base 1 1/4 height, 1 1/4 width, 1/2 thick

Hello, I have window channel balance with two different part numbers as shown in IMG-1295. I am looking for the correct shoes for both these channel balances, and the type of shoes as shown in IMG-1291, which is about 1-1/4 x 1-1/4 in dimension. Also, I am looking for the missing part that holds th ... (cont.)

Needs assistance please in identifying this balance

Please take a look at these photos and see what you think.

34 inches long. Atrium window.manufacturer. Installed 2007

Greetings, I am having difficulty opening and closing my 25 pound window. I have removed the channel balances and pivot shoes and ordered from you: 2- S765-30 (option 29-5) 30" series 765 balances 2-15-046 pivot shoes 1.2 inch thick. The new pivot shoes are clearly larger than the old ones plu ... (cont.)

I need some channel balances tilt windows

No markings found.

I have reproduced part of my first message to your firm below.It is very difficult for me to remove the window again without parts to make the repair (I am a senior). The pictures and the description will hopefully make identification possible. I am surprised to learn that you do not recognize Stane ... (cont.)

Photo 1 is the bottom mechanism attached to an aluminum square bar imprinted with 26B , BSI VL. The bar measures 1/2 in by 1/2 inch.The bottom plastic mechanism measures 1 1/2 inches wide x 2 inches long x 1/2 inches deep. The second photo is the top of the aluminum 26 inch bar showing that it has ... (cont.)

I have some tilt double hung windows that have issues with the balance. The side mount pivot bar snapped between at the screw hole and broke the shoe. They are 25 inch balances with the hook at the top vs the screw in attach point. I want to replace 4 balances on two different 25# windows. The 2 ... (cont.)

I need to know the name of this part and whether or not you have in stock.

I need to replace balances in unidentifiable window. I have found replacement pieces for the pivot shoe, bar, inverted link and clip that will match perfect, but I was hoping for some advice on actual balancer/spring. The current channel balance has spring on the bottom, with the cord running throug ... (cont.)

Hope you can assist with these parts. Thanks

Hello, I'm looking for 6 replacement channel balances. Current stamp is "26G H BSI" I have 2 balances with broken plastic shoes. Please let me know if you need more info. Thank you for your help!

I have a fairly broken 29" SERIES 795 CHANNEL BALANCE (I'm guessing). I have never done any window repair so I'm sending pics, just in case. I can't find any manufacturer on my windows. I think they are Andersen series 200double-hungs. There is a small clip at the top which I have included in the ... (cont.)

Team: I am trying to get my wooden bedroom (can tilt forward)window to open and stay open. I cannot find any manufacturer information as I am in a condo that was built in 2007 and I don't have the ID of the developer. The side springs/balances need to be replaced in order to raise and keep the wi ... (cont.)