Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

Hi, I have a replacement part # 3440 BSIEP I got from a neighbor. I need 6 more however installation of the balance is not on your video. The balance is 35" long and when installed in the Kinco window frame with the clip in the frame at the bottom of the balance, the top of the balance is against ... (cont.)

I have a broken balance with a part number 26 5 FW CMC 10, 1/2"W x 27"L

Hi, One of my channel balances broke and would like to find a replacement for it. I have attached pictures of it. Stamped with : 23 9 30# CN CALDWELL Metal piece: 1/2' wide 24" length Let me know what other info you need to identify it. Thanks. Andy

Trying to find part number for a 34" hemmed channel lift with double spring. Numbers on channel are 33DS then BSI then 45. Also has small LA stamped by BSI. It appears that it might be your S380-34-3350 or S385-34-3350. The top end piece is black, winged with a square top, but in the past I have ord ... (cont.)

Hello, I cancelled an order for the Series 380 because I think I chose the incorrect shoes. Based on your part pictures, I could tell my parts looked close to 19-005 tops and 15-095 shoes. I attached some pictures here hoping you could help to identify them. I would like to reorder for 4 each ... (cont.)

The parts has this markings: 20-4 EH5 CMC 75 The length is 21" from begin to end of the metal piece. Thanks.

Confirming part to order. Stamped on metal- 3606 and NK BSI. Body (metal-steel) is 37" long and 1/2 inch ide. This looks like your Series 380 with 19-005 top and 15-005 shoe. Both top and shoe have wings. Also, did not understand what the options were on your description sheet. Do I need ... (cont.)

I need two of these balances

Looking to replace (1) balance from WindowMaster single hung. Number stamped on balance is 2140 but didn't find a balance with an identical top/shoe match on products page. Please send parts # and cost (incl. shipping). Does balance come with top & shoe attached? Thank you, Frank ... (cont.)

Hi, I am not sure which window channel to order. My broken on is a 27" length x1/2" wide channel with the numbers 2630 bsi printed on the back. From your website, it looks like there are a couple of channels that have similar top and bottom brackets. I will attach a couple of photos of the brackets, ... (cont.)

Hi, I needed to replace one of the channel balances of my non-tilt window from Lowes (which seems to bear the Milgard emblem). I took the channel balance (1/2" x27") out, the string to the pulley is broken. My questions is, my channel balance looks like Series 380 and 385 as posted on you we ... (cont.)

I have a 1993 Skyline mobile home with a broken 23" channel balance. The top guide looks like 19-005 though there is a groove that I don't see in your photos. The bottom guide is 15-005. The markings are "22 4 CALDWELL JL." The windows weights 21lbs. Can you direct me to the correct option. Is 2 ... (cont.)

Hi, I have a 20" 19 4 JP Caldwell channel Balance that needs replacing. It looks like it has a 19005 top but I can't tell the difference between the 15-004 and the 15-005 shoes so it's either an S380 or an S385. Would either one work? The only difference I can tell in the shoe is that the 004 may ... (cont.)

I found your post about the difference between the 380 and 385 series balance. Paul from SWISCO responded: "May 21, 2012 Thanks for posting. Please look at the respective part pages for the 15-004 and 15-005 balance shoes, which are for the Series 385 and Series 380, respectively. Do you s ... (cont.)

I have a non tilt balance that has 16 3 BP CALDWELL stamped on it. It measures 17" (metal part only. Could you tell me what part number to order, and are left and right the same as I will be ordering both.

The stamp on this 29" channel balance says 28D. I called a repair shop here in town and they quoted me $55 for the install, etc. but was wondering if it was simple enough to do myself.

Fixing Nuair aluminum windows in my daughter's house. Windows are double glazed. I have one of the balances in front of me. The markings are: 28DS DL 38. There is also BSI placed at 90 degrees between the 28DS and the DL. The foot appears to be 15-004 or 15-005 and the top is 19-005. Wha ... (cont.)

I have to replace a Milgard balancer. It is stamped "32 9 IP Caldwell". Can you please advise on replacement part. Thx, Roger

Need to replace a - Caldwell 33 3 LP balance, do you have a replacement or part number? Thanks Hugh

Looking for channel balance replacement parts for a Kinko window.Could not find replacement part on your website. Do you carry the following item. Non Tilt window 1/2 inch wide 30 inches long stamp 29-6 LX CMC 11