Viewing all customer Discussions for:

58-056E Swinging Door Compression Foam Seal

I have a bow window made by Certainteed window. My weather strips are dry and brittle. Needs to be replace . Can you help with the correct weather strip ?

How do I find this? It is for a front door.

Weather stripping is just dry rotting and it just fits into a slot in the window. The crank works until you get to the point of closing the window all the way.It looks like the gears are just above catching at the end so you can crank the window shut. Thanks Marty

We have G-U sliding doors and the seals where the vertical part of the door meets the jamb are failing - they are very sticky and pull out of the kerf they sit in when the door is opened.I've looked around and can't find anything equivalent. I've tried a different kind of kerfed gasket but it was to ... (cont.)

The weatherstripping on our threshold is rotting away. It is a Pella door but the part is on the threshold. Any ideas?

Please advise me if these parts are available through Swisscom. Windows are approximately 25 years old and I am unable to tell who the manufacturer was.Thank you for you assistance.Lorey

The height is 5/8" with each side 1/2". The part that is attached to door jam is 3/8". We would need a total of approximately 24' in white.

I'm trying to locate replacement Pella weather strip and door sweep for three patio doors. The measurements appear to be 5/8 (but have been compressed over the years. The house was built around 2000 if that helps.

Hi. Can you help me identify what type of weather stripping I should use to replace this current one?

Is the SWISCO 58-173 a replacement weatherstripping for a 30 year old Pella entry door. It seems to match up in most respects.

Hi, I have a 72" double door. The stripping between the 2 doors is coming off. The stripping seems like vinyl. Do you have the replacement. It is a BWI door.

I have built 6 replacement doors all with the same weatherstripping. Can you match it?

This weather strip is about 1/2 the size of a off the shelf leaf weatherstrip from Lowe's or Home Depot. The rigid leg is about 1/4 inch, the leg that lays against the door is about 3/8 inch and the leg that seals to the door is about 1/4 inch. The original pieces are 8 ft long. I have contacted the ... (cont.)

I am trying to replace the kerf style weather stripping on an exterior door. I am having trouble finding replacement weather stripping that has a wide enough Kerf. I need 1/4" wide. The groove in the door is 1/4" wide x 1/2" deep. Everything I have tried is too narrow and just falls out of the g ... (cont.)

Kerf Mount Sweep Seal. The item you sell (58-200) and I bought is 3/8 on the length of the flap. The kerf fit but the leaf part at 3/8 is to short to seal the doors and needs to be 3/4......Do you have the wider leaf? if you don't do you know who does.

Jeld Wen door 80 x 36

I am having a hard time finding a replacement leaf weatherseal for my front door. I've uploaded a photo of it. The dimensions are 1 1/16" long x 1/2" deep. The zig zag shape with three corners and the depth seems to be unusual. Can you help? Thank you, Lori Olson

Hi, I have 9' tall exterior doors and I am trying to find white, push-in replacement seals similar to item 58-056E. I am having no luck locally or online. Can you provide this length and color seal? Thank you.Greg

Can you help choose the correct weather stripping for my 2001 Eagle doors? I've attached 3 profiles of the stripping.Thanks,George

I purchased this home in 1991 - there are no indications of the manufacturer on the door but the windows are Kolby and Kolby. The door are missing the shoe weatherstripping in the picture. The picture only shows the metal frame but I assume there was at one time a rubber insert