Viewing all customer Discussions for:

62-108 Tension Cord Clip

Metal hook 25 5B.S.I I need 2

Hello, I have a channel balance marked with 26. BSI. PM It is 28 inches long in total (the metals is 26 1/2 inches). I replaced a few at my old house, different house now

Channel balance for a 52" x 28" Cascade split window. Metal length of this balance is 24". The metal clip on the pulley end of the balance that fastens to a hole in the window channel is broken (the attached picture is of an unbroken clip). I would prefer to buy extra clips if you have them for f ... (cont.)

Channel Length is 12" no stamp windows are vinyl replacement inserts install around 2005 two balances needed

Hello Swissco,One side of my extended travel channel balance is broken; and hence I need two such balances. Could you please let me know if you have these and if yes, the cost for the same?ThanksJitendra

I have an 18" channel balance with the extended travel. It has "17 3" and " B.S.I" stamped on it. I believe it is a BSI 60G series. It is 9/16 wide and 5/8 deep.

1. Length of metal channel is 19 5/8" 2. Stamp is 19 3 and to the side of this stamp is B.S.I. with PG to the side. I would send you a photo of the markings however I reached my 5 photo upload limit. 3. Manufacturer is Certainteed, all windows were installed when the building was built in 2006. 4. ... (cont.)

When I opened my window, the window balance came apart. The window balance on the other side remains intact, but I didn't remove. The length of the balance is 30 inches and width is 1/2 inch. The balance is labeled "29HD-45"

Hi, We have two single hung non tilt Milgard windows that have broken channel balances. The larger window balances say 26 5 BSI. The smaller window balances say 26 4 BSI. I can't find the correct replacements, if you can please help. Pictures attached. We are selling our home next week and need to r ... (cont.)

We need an 18-5 channel balance that has a specific hook that comes attached to the balance already. The one in question is item code 62-108 (tension cord clip).

Hi in one of the other windows this black clip on the left has broken off and the window balance goes above the window. Can you tell me if the window balance includes the piece that clips to side of the window

Need a pair of channel balance that measures:metal length 25-5/8", width 9/16", depth 5/8"label on metal: 25 5 ?.S. PG (as shown in attached photo)bottom attachment depth: 1-3/32"Would the standard 25" or 26" balance work? What strength option should I choose?

I have Certinteed windows in my house, all the sash balances have broken, looking for replacements. The channels are 1/2" wide and 25.5" long. There is a stamping of 25 , 3 visible on one end, any help is appreciated.

Existing channel balances are all gummed up and causing the terminal clips to bend where they attach to the window frame. The metal channels are 23.5 inches long. Also have cheap plastic frame clips that are brittle and breaking whn I try to pull them out to re-install the existing channel balanc ... (cont.)

1/2 inch channel width

19 5/8" channel length, stamp: 19 3 RL 8.S.I., mfr: Milgard, only the hook is broken. Can I purchase just the hook? Otherwise, I need a quote for 2 balances so tension is same left and right.

I need 2 window channel balances with a length of 30 5/8 (might also be 30 9/16, not sure if it makes a huge difference).There is a 30 3 stamp on it. After looking at your website, I believe I need the s 385 (please confirm that along with the size from the photos attached) Please give me a quote f ... (cont.)

Hello. I think this part is for a Milgard window. (there's no name on the window, I just know they were purchased from Lowes). I needed to know the model number to buy the replacement. Thanks!

The metal channel measures 32-1/2" or 32-9/16". I believe you consider it 1/2" channel. I need 2 pieces (1 for a spare) Also, please include 20 pcs (or std package) of the clips. Ours are all bent out of shape.

One half inch width. 27 5/8 " length of metal part.