Viewing all customer Discussions for:

62-108 Tension Cord Clip

I have a balance with print BSI RG 25 5

Only number on part 19 4 B.S.I. PM Please see photo attached

This balance says 28 3 (BSI VJ) I will need 4 of these

Looking for a replacement to original BSI 1/2" channel block and tackle balance non-tilt for Certainteed single hung window. The metal portion measures 31 1/2" and total length with plastic ends is 33". Thx, Mark

bar says 2230 cj (logo that looks like AT) JA

25 1/2" x 1/2 From Milgard window

I am looking for 2 of these in the pictures supplied. Need a right and left side if they are different. The looked the same to me.Support balance. See pictures. Tip to tip = 27 inches. Just the metal area is approximately 25.5 inches.

Hello, I am looking to replace broken plastic tension cord hangers in some very old (1987) Huttig wood windows. The first picture is of one of the hangers, and you can see that one of the tabs is broken off. The second picture is my crude attempt to draw in the missing tab. With both tabs, the ha ... (cont.)

Hello, I am looking to see where I can get a replacement clip for my channel balance. Mine broke, but the unit itself is still fine. Thank you, Bill

I have two windows that have two each of these. All four no longer lock into position, I think the tab that locks into the window frame has rusted away. Let me know which balance I need to replace all four of them.

Could you help me find the right window Channel balances, I need 4 of them. Thanks

Hello, I've attached 3 photos and need your kind assistance to help me identify which Balance I should order to replace this old (original) balancer that I currently have. Thanks in advance for your assistance. -Derek

The length of the metal channel is 20 5/8". Stamp on the balance is 20 3. Please include one quote for (4) balances and one for (14) balances.

I'm looking for replacement balances (#2640) 27" long, 1/2" wide, 5/8" deep for my Milgard windows. I've attached 3 pictures (2 of the foot and 1 of the top) as I'm not able to tell on your website which product I should be ordering. Could you please help to identify the correct product I should ord ... (cont.)

My old balance measures 31 1/2?And it?s stamped 31 5 BSI on old balanceDo I get 31? or 32?Should I order a S350 based on picsThanks for your help Mike

26 1/2 inches long metal shaft, not including plastic end parts. 1/2 inch wide.

Hello, I need help finding the metal clip for my channel balance. H-C40-54-90 H-C35*-108X90 (mull) August 14, 2006 850396 001 0548 SUCL LOWE4V 548 Weight is 17.5 pounds Stamp on metal Balance is 24 4 rk Metal measures 24 1/2 in. If I can not get the metal clip, what balance would I need? Thank ... (cont.)

Do I order a 33" or 32" the only number on the balance is 32 5

The metal part is 22 5/8?. The window is H-C40-54 x 90 Windowmaster. The stamp on the channel balance is 22 4 BSI PB

The metal portion measures 26-5/8", so is this a 26" part? The numbers on part appear to be 351 and 26 and 4 PH. So what would be correct part to order?