Viewing all customer Discussions for:

18-008H 5/8" Top Sash Guide

One Channel balance says "31 3 JK Caldwell" and the other is stamped "31 4 Caldwell FM". Multiple parts look bent, broken, or chipped. The metal part measures 32" even though it is stamped "31". The sash weighs 21 lbs. Let me know if you need further information. Thanks,

Length of the metal channel 26 5/16 inch long. Stamp shows 26 6 HN

insulate windows. I need a total of 4. I also need the piece that is attached to the window. see one of the photos. metal length is 29 5/8" long. overall is 31". there is a metal stamp example, hard to read, it reads 29.4, maybe B.S.1, om

Hi! I have some windows where the balance does stay attached to the sash. The springs in balance seems like they are still strong but the move up fairly slowly when the window is lifted. They also can shift above the sash. I tried replacing the sash cam occasionally. Should replacing the whole bala ... (cont.)

I need a replacement balance. The manufacturer provided me with the following description of the window: window size is a stock size of 40/60 OR, is full tempered, with HP-LOE glass, DSB They didn't know the size of the balance but it has "5500" on it

Hello:I have about 35 year old sliding windows that need replacement of the balance guides. Attaching the photos. They are 22 inch long, with the balance of 21 inch long. I found similar Caldwell Series 300 Channel Block and Tackle Window balance, but not sure if they have to be Stamp 21-1, 21-2, 21 ... (cont.)

I have 4 double hung windows where the balance falls out when the window is opened or closed. I have attached photos. The length of the rod is 19 and 1/4 inches. I also need 4 take-out clips. The original ones are plastic and the edge that is to hold the balance for window removal has cracked off so ... (cont.)

I need a 17-4 and 26-4 block & tackle window balancer.Thanks,Dan

Hello, this part is broke. Metal part is 23". The stamp is 22 3 LQ Caldwell. And the plastic window channel balance is broke. Please help me with the parts I need to fix my window.

31 9 BSI RM channel balance

I have rented a house with windows that slide up and down. I'm not sure if that is what is called double-hung style. The label on the latch hardware on top is "certainteed". One window which is 14" high (outer dim. of height) is missing ALL hardware that keeps in place. The design is such that the f ... (cont.)

Hi. I'd like a review to see if I have the right part. I think I need S385-26. I have a non-tilting window. The length of the metal frame is 26" and is 1/2" wide. It is stamped 2540 EE B.S.T. The bottom fitting depth is 1 1/16" and has wings 29/32" wide. The top fitting also has wings 29/32" wide an ... (cont.)

Hoping you can help as I had no idea there were so many different options and parts. A tenant notified me a window was opening/closing properly. After removing the sash it looks like the top guide on the left side is broken. I'd like to replace the top guide, and while I'm at it replace the balances ... (cont.)

I need channel balance and top sash replacements for my non tilt window. The existing balance metal only length is 28" long and 9/16 (1/2") wide. It is marked 2730. My window sash is 15 lb. The top sash guide appears to be a 5/8" product code 18-008 or 18-008H

Don't know what the name of this part for the window is. It is a stop that holds window spring down. Please help! Thanks.

Hello, Markings: 13. 2 B.S.I. Channel Length: 13 5/8" (metal end to metal end) Also need the white plastic window edge block thanks, Norm

HI Please help, what is the part # [see photo] that has a screw to secure the metal window frame to go with channel balancer S385-21 for stopping window move to top, The plastic is broken on one side and need a replacement. Also I need the 2nd part# for the square drive I believe it is #2. Thank ... (cont.)

Hello, Looking for the balancer and top sash guide for a vinyl window. I attached the label of the window. Seems like the top sash guide is your part number 18-008. The balancer is 26" long. It has the number 2440 BSI KM embossed on it. Please see attached photos. Thank you for your help. ... (cont.)

I believe I need to replace window channel balances. Pics provided. 29" long, has marking "28 9 98# CK Caldwell". The left side of frame pictured has it attached with one empty hole above it, the right side, not pictured only has one hole. I see no take put clips anywhere. Do you have parts I need? ... (cont.)

Hello, I would like to track down the plastic piece that has a single screw in the top channel of the window. I would also like to replace the window tension retainers that are spring loaded and the retainer clips that allow for the installation and removal. Please let me know what information you w ... (cont.)