Viewing all customer Discussions for:

18-008H 5/8" Top Sash Guide

Please provide the part number for this window balance. If I were to only replace the channel balance top what is the part number? Mine has a rivet.Paul

The manufacturer of my single hung vinyl windows is not known. The sash seems to have a lot of lateral freedom for movement when raised. All of the windows have channel balances popping up. I suspect the manufacturer installed channel balances with wrong sized end caps. How does one determine dimens ... (cont.)

This part is on a military aluminum window. It has something to do with the balancer

I have Series 385 balances and the originals are marked with a 3130 stamp. When I installed your 3130, it began popping out of the window. I also checked and my window is 31-1/4" in height. (In the photos of my series 385, the original is stamped with the blue ink.) Could it be popping out because ... (cont.)

Hi, I've attached photos: - One of a metal clip-like part (I don't have a photo of it in place, sorry)- Two photos of a plastic part--one in the window mechanism and one that is broken off.These were located when we replaced Series 385 channel balances in four windows (three 33" and one 27")and we n ... (cont.)

Attached pics are of one broken balancer. The channel is 9/16" wide (nominal 1/2") x 5/8" deep x 22" long. Stamp on back reads "21 D". Have ten windows of different sizes that won't stay up. House is 30 to 35 years old. Windows are probably original, but not sure. Do you carry replacements? The bloc ... (cont.)

Hi =- thanks. Looking forward to fixing my 1987 - era windows. see label scanned from one of the windows. Mfr code mg-3 Series 1500 DH-R20 MST 4060

I'm looking for this part shown in the photos. I'm not sure of the official name, but it's a part that's mounted to the inside track of the window itself that the balance pushes against when raising the window up. It's held in place with 2 small screws.I did find a model number on the window if that ... (cont.)

Looking for these window balance channel accessories Current vendor does not supply.

Looking for these window balances and the top wedge pieces in the track

We need to fix the window. It has no spring guides currently.We can send more pictures as needed.Can you help us find the springs we need?

I ordered around 20 balancers from you a few years back. The length on this one is perfect but the tension was never correct. It is hard to lift and clothes equally.I need two replacements with the proper number. The 3030 is too stiff. I also need 10 of the plastic corresponding parts shown in the p ... (cont.)

I replaced the balancers but one window has a broken Top sash guide. I have include pictures. 5/8 x 2 1/4. Im thinking 18-008 might work. Thanks for your help. Rich

Hello, I am looking for one of these parts for my certain teed windows from 2007, there a bout's. Apparently it never got installed at the manufacturer. This part keeps the channel balance from springing out of the sash channel. Thanks.

Recently purchased a home with somewhat new vinyl windows but none of the channel balances are installed. I have 8 and i need 16 total. If i can get a match to these ill need 8 channel balances and clips.

I need a replacement channel balance for a window. Broken one was evidently discarded during my renovation.Handyman who attempted to replace it was unable to get the one on the other window out to measure how ever took the picture. there is at #112 stamped on it. The window is 13 3/8" high. ... (cont.)

This mounts to my window sash and keeps the balancer top secured. 5/8" wide by 2-1/4 long

Can you identify this sash cam. It has broken.

I've attached a photo below and it appears that the channel balances were torn out for some reason. The channel width is approx. 5/8" so I believe a 1/2" channel balance would fit, I'm just not sure of the length or the type of end fittings. Judging from the broken plastic fittings at the top and bo ... (cont.)

Hi, The plastic clip attached to the side of the window is broken, this is needed to keep the channel balancer in place. Attached the pictures Could u please identify this piece