Viewing all customer Discussions for:

18-008H 5/8" Top Sash Guide

The metal portion is 33" long. I have included pictures of the end pieces, and a mystery piece that fell out when I removed the window. It appears broken. ThanksGreg

I need 4 balances for 2 windows of the same size. steel part is 9/16 wide, 5/8 deep. Windows weigh just under 25lbs. I need complete balance part with plastic ends, strings and clips. The part stamped is 3290ca36.Thanks for your HelpMark

Hi, I have these plastic pieces at the top of each window side. One side is broken. I'm wondering if I need to replace it along with the window balances. If I do, what are they called so I can find replacements? I haven't ordered new balances yet so I don't know if they would work if I just left th ... (cont.)

Channel length 24.5 inches Stamp says 25 5 B.S.I. PB CertainTeed window 2006 Need two balances, plus one stop in the frame and one part at the top of the Channel in the window. See photos.

Hi,I need to order Qty(2) of the subject "Top Sash Guide, however I need your help in identifying the Part # at SWISCO. See attached pics....Thanks for your Help.Rich

I'm looking for a top sash guide to replace one that looks like that in the photos. 5/8" wide. 2 screw holes in the bottom section, one oval shaped hole in the bottom section and 2 oval shaped holes in the top section.

I am looking for 2 of these parts. Can you help? I have the replacement balances. Property was built, and windows installed, in 2002Lynn

Do you carry these parts. If so, where in catalog. Does this one look familiar

Last year repurchased 19 window flashes and now we need the tops and bottoms can you please identify this Edwin

I have a customer that needs four of these. One is missing and the other three are all broken in different ways. Theres also a picture of a part that is screwed to the top of the sliding window frame. some or missing or broken. Id like to replace every part that I can. Thanks for the help. ... (cont.)

The metal part without clips measures 23 15/16" . It is printed on the frame as seen in one of the pics 23 3 BP CALDWELL. Can you tell which part numbers I need to replace for both sides and will do 2 complete windows. With the new balance channel will it come with the new plastic clips that attach ... (cont.)

I have the Chanel and it looks ok but I need to attach it to the side but don't have and of the parts for that. What do I need. About 1/2inch Chanel about 12" long

I'd like to purchase 4 (four) Top sash Channel Balance Guides. Please see attached photos. Dimensions are 5/8" wide x 1 1/2" long. These are from Millguard windows. I recently purchased two replacement channel Balances - see order # - Your SWISCO.com order #1436220 has shipped. After changing ou ... (cont.)

Please help me fix my windows... got new balances but found plastics piece broken on both sides....one screw holds it in... I don't have the piece to show you. Mark

Hi, I was trying to find a correct match for my window balance/channels. I have a few that say 25-9 and a few that say 24-9; all for the same size windows. On the 25-9 balances, the plastic top part was cut at the top, so it would fit. I do think the 24-9 is correct; bi can not find a match in yo ... (cont.)

What type of Window Sash guide i can use. I have S351-27 channel balance. Thx, -Pratap

Will try to order like a small pack of this guy

The balancers I am replacing have the following part number stamped on the back side: 25 4 FK Caldwell The length of the metal frame is 26". The width of the back side of the metal frame is 9/16". The width of the front side is 5/8". The top guide appears to be your 19-002 and the bottom shoe(IM ... (cont.)

I need to find this thank you.

Hi Swisco, These are 30" channel balances (metal only length) Two different brands or channel balances were installed in the same window. Can you recommend a replacement? I saw 349, 350, 380 looked all vaguely similar. Here are some photos that may help:l. Thank you