Viewing all customer Discussions for:

82-030 Sliding Patio Door Handle Set, 3-15/16"

Hello can you help me find a latch for this door?

The Patio Door is fairly new (Double Pane) and has a Vinyl Frame. All that I have is the Handle with a 3-7/8 Hole Pattern and the keeper plate that has a an overall length of 9-5/16 and width of 9/16. It has a double mortise hooks that are spaced 5" apart. In the door jam the Vinyl Strike Plate has ... (cont.)

Looking for replacement handles for Windoor model 8000. Prefer just outside pull if possible.

Dear Sir or Madam,I have a sliding glass door with the following handle hardware as produced by Sash Controls located in Ferndale Michigan:Interior Handle: Part # 1060-1255Exterior Handle: Part# 1060-1540The sliding glass door is 1-5/8" which and the two hole centers for attaching the handles are 3- ... (cont.)

I currently have the below and need a replacement set, the measurements from the center of screws on the inside handle is 3 15/16 and my outside handle has a cylinder lock and keys. Inside Handle has a part of 1060-1943 Outside has a mfg name of Sash Controls Inc, Part #1963.

The door lock does not work any longer. The serial number on the door is PELLA 080213 G0316449424

need 12 sets

Could these be your #82-030 and #82-080?

Door handle replacement - are you able to identify what door handle we need to order? Please see the attached pictures let me know if I can get you any additional information. Thank you so much I appreciate it. Tammy

We have a sliding patio vinyl door that we need to install a new locking handle with a Schlage keyway. the door is 1.5" thick and the screws are 3 15/16".Sincerely,Don

Please see attached photos. This is a handle set for a Kawneer patio door slider. Could you please identify this handle and possibly provide a quote?

It looks like the part number of the handles are M0092A and M0091. Hoping you can find a Polaris handle or some other manufacturer that will fit the door.Thank you!John

Need a keyed lock handle got my Guardian Geneva slider door ANSI 297.1-2015 16 CFR 1301 II SGCC 2259 1/86A CAN/CGSB-12 1-2017

Hi my name is Mike my latch on my door handle is broken so I can't lock my door can you please see if you can find a replacement part attach is pictures of the part if let know if you need more information thank you Nami NFRC 100/200 Code: ALS (Yuma) Ratings: SGD-R20 Series: 170 MST: 80610 ... (cont.)

I have a slider that the handle broke off and I'm trying to find a replacement that might work. The door I think is CertainTeed Series 800. The pic's show 3 wholes, however, only the 2 showing screws actually had screws. The top hole only showed after the handle broke.

HiLocksmith was here and advised I need sash control on 4" center. Opened this handle and found it's a Ferndale and the numbers 060 1255.Rhonda

I moved into this house and it didn't come with a door handle on the door and I have no door handle to like bring to a store or something so how in the world do I measure this to get a door handle that fits

I have a white, vinyl Jeld-Wen vinyl sliding glass door that I purchased through Lowes (special order) about 12yrs. ago.... I need to replace the handle as the locking/latch part broke. It might be a SVC-90035? The handle has a center (vs an offset) latch. The handle is white, 8 inch long, 1inch wid ... (cont.)

trying to find replacement handle

I have a sliding glass door in a home that was built in 2001 that has the Guardian glass stamp on the glass. I am hoping that you have the parts that are needed to get the door rolling again. Above I have sent pictures of the parts I need. I will need two bottom rollers on each side of the door, the ... (cont.)