Viewing all customer Discussions for:

82-030 Sliding Patio Door Handle Set, 3-15/16"

Ocean two

I need a replacement for my sliding glass door. The handle broke and so I need to replace it. The door lock has the number QC-PASS 537-45 (Rev C) 23/09/12 The holes are 3 15/16. The hole in the door is 1 cm.

Door handle replacement

Door latch is broken

I started by attempting to replace the sliding door handle for an elderly friend. She wanted a keyed lock on the outside and purchased the handle. My first mistake was letting the latch drop down into the door. My second mistake was drilling new holes to make her new handle fit. I won't work. Pleas ... (cont.)

I have a silver line 5700 white sliding door and I am looking to replace my existing handle with one that has a key lock. Do you have?Thanks,Kim

The Door is referred to as a ProFinish Brickmould 600. The distance between the two small holes is 3 7/8" (3 15/16"). The distance between the two center holes is 1.5". The small holes are 5/16" and the large holes are 1/2". I need a keyed locking system for the outside

I have a Ali ADW-8 ASTM 2190-ARG sliding patio door (Make date 7/11/2015; Sales order 07060715; Warranty 21700643) that had the locking mechanism fall in the door and the handle broke. I have tried every piece at Home Depot and Lowes and NOTHING fits the locking mechanism or the door. Please help. ... (cont.)

Lock assembly DR05-1510

Sliding glass patio door handle with double lock. Would you have something like this? I believe the screw hole spacing is 3 15/16.Regard'sDerrick

The handle on my sliding glass door broke and I need a replacement. Please advise part number and a resource to purchase a new handle. Thank you, John

Need new handle and inner lock. Called door places to get fixed and was told they cannot find a handle for my measurements

I'm wanting to swap out the door handle on my sliding door. There is already a latch in the door, the mounting screws of that seem to be of the 3.5" size. Do I have to purchase the mortice lock, since this isn't a new installation? I was going to use 82-086....that will fit my existing mounting hol ... (cont.)

5820170 is my lock number or latch I need to replace that and then I need to find out what kind of extruded aluminum I need to rebuild my outer door and I need new door handles for my double sliding door and I would like to get an external key lock for it

I'm looking for a new handle and locking lever. Here are some pics. Measurements: Center of top hole to center of bottom hole is 2 3/4 inches Center of top hole to center of 2nd hole from top is 1 1/2 inches Center of 2nd hole to center of 3rd hole is 1 1/2 inches. Depth of the hole in the side o ... (cont.)

based on the patent number on the existing MORTISE LOCK (see the attached picture) part number is 82-211. However the keeper is a different design. Would it work in my case? Also, can you help to identify both sides handles (similar to existing - see the picture) and compatible lock cylinder. ... (cont.)

Looking for the part

I ordered 82-107 because it had broken off but when I went to install It and checked the mortise as recommended it doesn't turn so looks like that needs replacing too Looking at my photos what mortise do I need? It is 11.5" long and the holes where it was screwed into the door are 11" apart. Also th ... (cont.)

Glass door 2 one opens easily other hard to open I don't know what to fix? Both doors need complete set with lock and keeper. Thank you

Dear parts department, I am trying to replace a white broken patio door handle and locking mechanism: the handle cover itself is 8" long the handle is 6 3/4" the screws are 3 5/8" on center the door theickness is 1 5/8" the lock mechanism is 1" wide and 12" long (screws are 12" on center). ... (cont.)