Viewing all customer Discussions for:

26-466 Pivot Bar, 2-1/4"

I have enclosed pictures of the Coil Balance shoe that I need. I think it may be part # 15-177. Are you able to confirm?I recently ordered Pivot bar 26-466 that is a match for the window.Thanks,Mike

It has the letter d in the center

Pivot shoe and coil#10. Cannot get right shoe to rotate enough to release from sash. Any suggestions?

These two pivot pins are broken from the bottom of the window. the number on them is 14110. Not sure about the window manufacturer. They rest in a slide track on each side of the window and allow the wondow to be swung inside for cleaning.

The bar is 2 - 13/16 " long the outside screw hole is 1 - 7/16" in and the second hole is 2 - 7/16". The measurement for the holes are to the center. There is the number 5 in a circle to the outside of the outer most screw hole. Both screw hole appear to be threaded and the screws do not appear to ... (cont.)

I have 2 windows @ 31 1/2" × 61 3/8" and 1 window @ 30 1/2" × 61 1/2" and need to replace both the left and right side tensioner assembly in each window, shown in the pictures.

Do yall carry these parts

Both springs are broken. I see a number 4 on the plastic but no other numbers

Pivot bar 2 1/4 inch 2 holes 1 inch hole spacing round end with wings. Windows bought from window world in Florida number on pivot 14447 17

This part fits inside the window and is attached with two Phillips head screws. this piece fits into the Product Code: 15-177 Coil Balance Shoe, Slate Blue

2 1/4 inch 10 14447

Hi. I have a window with broken pivot bars both left and right. Sent pictures of window and of only label I could find. Any help would be appreciated.

I am looking for tilt window pivot pins that fit your coil balance shoe #15-177.

This pair of pivot bars fell out of the bottom sash of a double hung vinyl tilt window. The screws were intact, as shown. The number on the part appears to be 14447 18. Since one of them is bent, I for sure need to buy two.

Length: 2 1/4" Hole spacing (center to center): 1" Raised Numbers "14110" and "p" Thanks Mick

Unsure of the make or model, but relatively new windows. The pin that holds the bottom of the pane to the frame has shorn and couldn't be JB welded back to health?.

Hello, I've owned my home for several years and am finally getting around to fixing some poor-performing windows. I need some help determining what pieces to order and would appreciate your help. I have double hung windows at look like they were installed in 2005. The label says series "0401 double ... (cont.)

Need correct one

I need help finding this pivot bar. Please see the attached images with measurements. If you need more information let me know. Thank you

I'm looking for replacement pivot bars for tilt vinyl windows that are marked with the window world logo. Previous owner installed them so I don't have exact specifications on the window. The broken part is marked with 14110-E on left side and 2A on right side. I need two of these parts because one ... (cont.)