Viewing all customer Discussions for:

33-016 #8 x 1" SS Installation Screw

I need few of left and few of right swing with dual arm as in photos.

41011 on the long arm. 41008 and 31876 on the other 2 arm components.Hope this helps.Thanks

I have several tilt windows that do not stay up when opened. I'm pretty sure the spiral balances need to be replaced. But also 2 of the shoes are broken. 2 questions. 1) based on the shoe in the picture, what replacement shoe should I use and 2) does the color tip look yellow or white or should I ju ... (cont.)

27" cover. Light green spirals on spring. Gray where red/blue usually is. 3" under clip. Window is wood 28h 28.5 w 3 over 3 panes. TY KARL

Hi I am looking for these window cranks. Labeled 1491-1201 on one and 1491-2208 on the other.

16 inch, stamped numbers: 16C BSI RG(small stamp, difficult read) Pivot lock shoe was difficult to remove, slid up the channel but it did not have wider gap? I don't see a match here.Pivot bar is 2 1/2 inchesI need the window channels, the pivot lock shoes and the pivot bars. I also need suggestio ... (cont.)

I have four identical windows and one smaller one that need to have their spiral tube balances replaced. All of them have broken plastic tubes that seem to be about .50" in diameter. The four identical windows have a 33 " tube, and weigh just over 12 lbs. The smaller window has a 28" tube, and proba ... (cont.)

Need screws for the parts below. product code -38-075 Product code 39-027E Product code 38-089 Product code 39-533

These limited travel possibly shimming screw posts have a slot for adjusting in and out. The wide face at the other end presses against the rough framing. What are they called ,what is their purpose and why are they in the way of replacing the coil shoe and constant force coil springs? ... (cont.)

Hello, I'm looking to replace the window crank sets, covers, handles, and locks for a right swing and left swing window all in beige. Thank you! - Amber

Greetings, I need to source the attached piece for an Eagle casement window. We have already ordered the operator but I'm told we also need this 'arm'. On the stainless piece you see in the photos, '40631-J' is stamped. Hope that helps. I have included photos and took measurements. ... (cont.)

Hi i would like to order 2 constant force window balance for the left and right side of the plastic window The weight of the window is 12.1 kg I need shoes and coils springs as well I suppose. Do i need to change anything else? The window has 2 brackets on each side which makes it difficult to ta ... (cont.)

good day. Having trouble finding the existing crank I have. The reason I'm replacing is because having the window open the wind moves the window back and forth rather then the window keeping still. I'm thinking the pin has worn down. Also is there such thing as a crank extension ? My existing crank ... (cont.)

Good morning! I have spiral balances in my windows and wanted to confirm the type. It looks like the S600 but I didn't see a white tip option in the 28/29 inch and wasn't sure what color to pick. I also wasn't sure which size to pick based off the 28.5 that mine are. I included pics to assist. Thank ... (cont.)

I AM TRYING TO LOCATE TWO REPLACEMENT WINODW CRANK ASSEMBLY FOR A CASEMENT WINODW AS SHOWN IN THE ATTACHED PHOTOS, THAT OPEN THE LEFT AND RIGHT WINDOWS. THE ONLY MARKING ON THE OLD CRANK ARE NUMBERS:40447 AND 41012 AND A DATE 11/19/01. Other part # 31876,41012,40447 truth hardware.I just took out th ... (cont.)

Hello, I've sent several pictures in order to see if you might know what brand of Windows I have and to identify the two forked brackets that are screwed into the window frame on each side of the sash. What are they called, and what do they do? I really appreciate any information you can give me. I ... (cont.)

marking on the device : Entry Gard Truth 40762 40761 31545

I am looking for a balance similar to the 770 but mine has a little barrel at the end instead of a hook. And the stamp says 40G. Is this something you carry?

Hi, Need help identifying these parts.

want to use these for old wood sash I am not replacing an old balance. I want to refit an old 1870's sash with the hybrid type balance you offer. I need tube diameter size and pricing?