Viewing all customer Discussions for:

33-206 Shoulder Bolt Washer

Our older 3-season porch has a few awning cranks not working, the one pictured handle broke off. The bottom two screw holes are 1 1/8" a part, the top to bottom screw holes are 5 1/4" a part and the elbow to end of arm is 2 3/8" long. Does the 39-025 come with all screws needed to attach back to w ... (cont.)

I ordered the 39-026 and it was very close but I need a different end. to attach to the window. Hopefully you can find it I attached several photos of the one I need.

This is the part that is on the side of every window pane frame that projects from the edge of the frame that when you close the window sits under the claw in the mechanism and locks the window as the crank is turned and draws the window up and in.

I need a bunch of the cranks and these other parts for my windows. I have measurements. Can you confirm what I think I need? Tim

I need this ASAP. I have sold my house and this repair is on my inspection list

Help I don?t know the correct part to get to replace my crank

I just received my RH Awning Operator (3/8" hole, Part # 39-419). With it there are several parts to link its arm to the arm of the awning window, including a 5/16" Shoulder Crew, 1/4" - 20 Thread (Part # 33-070). Also included is a #10 X 1/2" Pan Head Phillips Screw (Part # 33-081). What I need ar ... (cont.)

I would like to purchase is window crank for one that is not working well. I believe the Lenehan would work, you can tell me.A window crank just like this one that is not functioning.I also need all the supporting hardware screws what have you that would be needed to install the window crank.I look ... (cont.)

I have these old style steel casement windows that the previous owner rigged with a bolt and nut setup on the hinges. One half of the hinge has a different size hole than the other half. The bushing in the 2 pictures came out of one of the windows. The shoulder appears to be 5/16" I.D. & 7/16" O.D. ... (cont.)

I can't identify the brand of jalousie windows. I need the rivets, rivet casing/washer and clips for (a) connecting elbow parts together and (b) connecting the parts to the side wall track. (ie. I've already purchased a couple of new crank boxes, but the rivets I bought to connect them to the re ... (cont.)

I am hoping to restore some windows. I know little about window repair, to state the obvious, so I am hoping for your help. See attached photos 6 photos. 3 of which general photos which may help you identify the window. I will need operators (See photo) I will need bushings (slide bar guides) and ... (cont.)

Body is very similar to a Barton Kramer model #780. inside of crank handle is PAT NO C-11500-11. Inside body is D-198202U. Below that is RD 1963 CAN. Also a large square with numbers 92 and lines radiating out to corners of square from numbers. Unit was used to operate louvered tropical windows. Att ... (cont.)

Need a new operator for this really old awning window. Top to bottom mounting hole distance 5 1/4" bottom holes distance 1 1/2" Operating lever 2 1/2 " center pivot holes. 2 pictures attached

I assume I need a rh version of 39011 my demensions are vertical holes 41/4 horizontal 1 1/8 bar is 2 1/2 between holes any help would be appreciated

the measurements all seem to match. question about the 3/8 hole- mine is threaded to accept threads on bolt/screw. Are there threads in that hole? if not I possible could do a work around or less you have the exact match.

I need replacement screws and bushings for a jalousie crank out window, pictures attached. I can't find a manufacturer name on the jalousie windows, but the other windows in the house are harcar.

Looking for these parts for old crank swing windows

1. I am looking for some white crank assemblies like in the 2 pictures above. Screw holes 5 1/4" on center 2. I am looking for aluminum tabs to hold screens in place with screws like picture above. 3. I am looking for aluminum covers for hole in aluminum frame like picture above. ... (cont.)

Trying to figure out what replacement part I should get for this awning operator? And how to install...in your video it looks like there should be a screw to remove but it does not look like a screw?

i purchased the 39-012 Superior window crank.pictured below is the female receptacle located on the far right side of the old window arm into which you screw in either the 39-074 or 33-067 screw.i need this female piece as the one that is on the original arm attached to the old window crank arm is f ... (cont.)