Viewing all customer Discussions for:

33-206 Shoulder Bolt Washer

Take a look at our 39-011 and 39-012 operators, compare the dimensions of our parts to that of yours, and see if these will work for you.

I need to replace the crank handles on 5 of my jalousie windows on my back porch. I also nee to replace 4 panes of glass that have moisture in them. I cannot find the name of the he windows any where on them. The windows were here when we bought the house so I think they are about 20 years old. Do ... (cont.)

Looking for pins or rivets for old style casement windows hingesi only need 4 pins or rivets I ground the tops off so I could remove windows to replace glass thinking it would be easy to replace the hinge hardware. But not so easy. The rivets must be installed at the factory when making the windows ... (cont.)

I need a replacement operator that will last. The ones that I am buying from home Depot don't fit right and they don't last. The picture of the brown operator is an original one that is more than 10 years old and still works great. I need a replacement like that one. Also, I need oversized screws. ... (cont.)

I am looking for a few cranks that, There is no product company names, numbers, or markings. There are a few in which there are 4 screws in total and some that have one on top and two on the bottom. If you can provide me with information in which there could be a similar product in your store. ... (cont.)

Hi, This is from a Florida 50s era home. It is right-hand position. Has a worm gear insert that falls out. The handle crank is attached to the worm gear.

Pat.No 198202 US this is the only number on it. In case you cna't read the numbers written on the paper in the pictures the height is 5 1/4 distance between screws on bottom: 1 1/8 ctr to ctr arm bar is flat and ctr to ctr is 2 1/2

My window crank operator looks similar to this one, but my dimensions are 2 3/8? instead of 2 1/4? and 1 1/8? instead of 1 3/16?. Do you know if it will still fit? Is there another operator that will work better? Thank you.

Part for an old jealousy/awning window

I need 1/4"-28 shoulder bolts and plastic bushings for Woodco window crank arms.

I have attached 3 window crank pictures and a hand written picture of the logo and numbers printed inside the handle casing. The part number appears to be 11500-3 2 RH. Paten number appears to be D-198, 202 U 8. RD 1963 CAN. I need at least one replacement casing and hand crank, preferably 2 ... (cont.)

I trying to figure out which one to order. The Part measures 6" in height.

I, too, have LEMCO Series 30 awning windows. I am looking for the LEFT HAND crank.

Help,Need this yale crank handle that connects with 2 holes. please let me know asap if you can help as my tenants cannot close the window and all the a.c. is going out in Florida.Thanks,Diane

I'm looking for a replacement crank assembly.

Attached are pictures with dimension of operator I am looking for, need between 10 and twenty but want to get one first and make sure it works

I can't seem to find an operator the same as I have. Hopefully the photos with dimensions will help identify it.

39-252 looks like it may work. The distance from the top hole to the bottom hole on mine is 5 1/4"center to center, so is yours. The distance from the one bottom hole to the other is 1 1/8" center to center, so is yours. In the second photo the arm that attaches to the window is 1 7/8" center to ... (cont.)

Hello, looking for this part Markings are minimal except on the arms, the middle on has a 2 and the extender arm has both 78 and 0. I measured how you folks have yours advertised, and the arm is a 2 5/8" lower screw spacing is 1 1/4 height of unit is 5 1/4 Thank you, Jeff

Was supposed to have a 3/8 inch hole