Viewing all customer Discussions for:

15-025 Channel Balance Shoe, Silver Line

I need three 1/2" Channel Balances stamped 2530 (26" metal length) with Shoe #15-025 and Top #19-008 for 25 year old hinged Silverline windows. Balances are for the non hinged side of window. How do I order? I do not see this combination on line.

I need following three different Channel balances: 2140 / 1940 / 1340 Do All of these come with the top and shoe? if not then I need those as well. I believe following are the product numbers which I was able to locate on your website in regards to the channel balances I need. I have a total ... (cont.)

Hi - I have a double hung aluminium frame window and looking for the correct balance replacement hardware. attaching pics of the top, bottom The channel is 1/2 inch wide and there is a marking 2540 Thanks

I don't see this shoe and top combination in your balance assortment. Is it a custom?

Hi, I have Silverline Swinger windows missing channel balances. The full window hight is 51 inch. Can you please advise what size balance I need for these. Thanks --jsd

I have attached some photos of the part I need to replace. On one of the photo it say 2630 Q. I'm guess this is the part number. Please let me know if you carry this part. I'm having a hard time identifying this part on your website.

I need model number: 1 pieces of #1340 1 pieces of #1330 2 pieces of #1930 2 pieces of #1940 5 pieces of #2230 5 pieces of #2240 4 hinges 1 replacement window glass (25x22.5) window seal (gasket) for 7 windows The metal channel width is 1/2 in The depth is 5/8 The hinges allow the ... (cont.)

Hello I am looking to get some replacement parts but for some Windows on the property that I am maintaining and was wondering if you can help. Thank you for your time

I have an old invoice from Swisco for this balance. (Custom) 2130 Balance with 19-008 and 15-025 attached S100-22. Its a 22" window balance. I would like to order some more. However, I couldn't find them in the selection on your website. Including a couple pictures as a reference. Thanks for your he ... (cont.)

Hi, I am looking for a set of channel balance. It has 2530 BS 0 or C on engraved. The window is about 70 inches by 30 inches. The width and depth is about 15mm. On the left side of the window is the balance is attached to the window which is broken. Can you recommend which part are required for this ... (cont.)

Hi. Can u please look at these pic. We need 12 of 27"x1/2, with channel balance shoe/silver line product 15-025. Please let me know if you can possibly make them.

The number is 2230 is for a window balance I will sent a picture of the ends half inch

2 complete balancers, put together, part# 15-025 balance shoe part# 19-008 balance top, part# 2630 balance tube 27 inch in length,

balances have 1940z stamped on them. came out of an aluminum single hung window. they are not tilt. but they hinge outward to clean instead of tilting out. right side comes out. was curious do you carry parts for this series window? because i also need the hinges for one of the sashes. thanks ... (cont.)

Dear Swisco Techical Dept. We need to replace 7 sets of 32" & 4 sets of 26" channel balance replacement. It looks to me 390 series ( I am not sure), but the channel width is 9/16" and each side measures 5/8". ( marked 3140 on the channel) I am attaching some broken piece photos. The top ... (cont.)

I just purchased a 28 year old condo with Alum. frame double hung windows that have a hinges on the left side for cleaning, instead of the typical tilt out. Several of the hinges are broken and several of the channel balances and missing or broken. Also some the slides that prevent the window from o ... (cont.)

The window mentioned above has a hinge on the lower sash left side of window when looking at it from the inside. These vintage windows (1980's)are very common in central N.J. The channel balance on the hinge side is broken. I cannot remove the window to weigh it due to the fact that the hinge is riv ... (cont.)

I was looking for a non-tilt, single hung, side loaded channel balance replacements for my Silver Line windows, most likely installed around the mid to late 80's. I browsed your web site pretty well, and can not find the exact match of the complete channel balance sets that I currently have ins ... (cont.)

I need a 26" 1/2" width replacement balance with a 2540 strength. Your replacement balances are close but not exact. i do not know which is the best match. The bottom shoe from my balance is model 15-025 which is different that the shoe if I were to order a whole new balance. The photo below is ... (cont.)

we need to purchase the balance, it is 20" long and 1/2" width.