Viewing all customer Discussions for:

39-012 RH Superior Window Crank

5 1/2" upper & lower mounting hole 2" bottom plate with 2 screws 5/8" between screws Length of arms: Top 4" Middle 10" Bottom 4" That's the best I can do

the measurements all seem to match. question about the 3/8 hole- mine is threaded to accept threads on bolt/screw. Are there threads in that hole? if not I possible could do a work around or less you have the exact match.

Hi I searched for this crank and Google found a similar one on your sight but it has two mount holes at top instead of one. Do you have this part. I also need mounting screws and the clip to attach the arm to the window lever. Thanks Robert

i purchased the 39-012 Superior window crank.pictured below is the female receptacle located on the far right side of the old window arm into which you screw in either the 39-074 or 33-067 screw.i need this female piece as the one that is on the original arm attached to the old window crank arm is f ... (cont.)

Crank just spins and doesn't move window. I am unable to remove the bolt that attaches the lever that I am supposed to b able to remove. Any ideas? This house was built in 1979. Thank u for your time.

Take a look at our 39-011 and 39-012 operators, compare the dimensions of our parts to that of yours, and see if these will work for you.

Pat.No 198202 US this is the only number on it. In case you cna't read the numbers written on the paper in the pictures the height is 5 1/4 distance between screws on bottom: 1 1/8 ctr to ctr arm bar is flat and ctr to ctr is 2 1/2

The measurements of the pictured part are the same as part number 39-025 with the exception of the measurement of the two holes at the bottom of the window crank operator. The pictured one seems to measure 1 1/8. Your replacement part measures 1 3/16. There are no marking other than those on the ... (cont.)

The hole in the link is 3/8 in. The number 72 is stamped into the link. The number 91 is stamped into the rivet that holds the link. The inside bottom of the case is stamped with the number 31.

Hello,I recently purchased RH Superior Window Crank 39-012. It turns out to be unsuited to my needs.If possible I would like to return it in exchange for a proper crank for my application.I am attaching two images of the crank I need to replace. I?m hoping you can help me find the right one.I appr ... (cont.)

I am looking for a new window crank. Inside my existing crank the model number read 1RH 18-0821. What would you recommend as a replacement?

Can you please identify the specific crank assembly and window lock needed for this window ?

Hi, I am looking to replace a couple awning window cranks (bronze) and need a couple metal plates and plastic parts for inside the mechanism. I have pics attached and looking for help in matching up Thank you Rhonda

Do you have a awning window operator RH, brown or bronze color, similar to your Product Code: 39-012. Thank you for your answer.

Handle has following identifying numbers/letters: C-11 500-11 Crank Assembly has following identifying numbers/letters: Pat. No. 198 202 US 12. H.R. RD. 1963 CA I believe the manufacturer is Weathertight. The home was built in 1996.

the 39-378 is a right hand operator that matches the old operators I want to replace, hole centers shape ... I can not find matching left hand Can you help? I need two. The two holes on the bottom and the single hole on top are exact match to my piece.The center of the existing holes are 5&1/4 ... (cont.)

hello, I am looking at a 39-012 operator. I am measuring 2 and 3/4 inch on center arms, but your description is 2 and 11/16 on center. Am i measuring wrong, and this appears to be the correct operator? I need a few of these, and want to make up one order and get them all in one shot.... thanks. ... (cont.)

I can't find any name/number/marks on this assembly to identify it, I'm hoping you can help me replace this because the retainer threads have been stripped out. Measurements: 5-1/4" top to bottom (all measurements approx. hole center to hole center) 1-1/8" between the bottom two screw holes 2" ... (cont.)

Looking for a RH awning window operator (at least I think these are called awning windows). My broken operator looks very much like 39-378 (though it also looks a lot like many others). The dimensions are: Distance between top and bottom mounting holes: 5 1/4 (dim a) Distance between bottom two moun ... (cont.)

Your part looks exactly like the one I have but, I need the arm to be 7" long. Do you have one to fit my need?