Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

Need to replace the crank mechanism for casement windows. I don't know the maker. Original hardware. House was built in 1973. The original hard ware is a bronze color and the arm is about 13 inches long

Kindly help. One tooth is stripped. I am unable to find the model or its suitable replacement. Can anybody help me with this.

I am looking to replace a Norco casement window crank for a window opening to the right

Looking for parts

Need to see if there is a kit of all parts needed for a truth crank. The stamp number is 358-1R and 3581L. If there is a crank, lock, and operator all in one kit.

May need a few of these. Older Windows on a Church.

14 1/2 inch arm including gear

My window does not open further than this. I can close it but I can't figure out how to remove the last screw on the crank assembly because the arm is blockibg it. Any ideas?

I need 1-LH and 1-RH crank operator.I included a photo to help identify manufacturer-image 20190509image 2750 is the part that I needimage 012 is a tracing of the operator

Please send me the product code to order replacement crank operator mechanism. The window brand is "truth". Thank you? Gwenis

Truth 45251 13.5 inch single arm operatorNeed to know if the base of the crank is the same width as the truth. it measures 4 inchesdon't want to have gaps in the opening of the casement window

This is the handle for a 31 1/2 x 38 1/4 casement window. It was bought at Home Depot about 17 years ago. I have attached a picture of the sticker from the window as well as pictures of the handle itself and with a tape measure by it. I went to Home Depot to get a replacement handle but the metal ... (cont.)

Hello I am looking for 2 casement window operators to replace my old mila hardware. I have been searching around and found this link https://www.swisco.com/discussions/replacement-casement-operator-part-or-suitable-adaptable-replacement-77-30096 I wanted to write and ask if anyone has ordered th ... (cont.)

Can you help identify this window operator. I will need several.

Please help me identify the operator

Hi Dave, I wonder if you can help me in resolving my problem. I am trying to buy (4) of these window operators but I can't find them on the web. They are mounted on the base of each window and as you can see they are directly connected to the wheel mechanism that opens and closes the windows. ... (cont.)

"Bilt Well" operator from 1966.Window demensions: 23.5" X 26.5"Heinz

Do you carry operators for Caradco C-200 casement windows? These are original to our house that was built in 1988.

Trying to find replacement parts for this crank mechanism. The main problem is that the arms drop out of the track.

we need a window crank that opens opposite of this photo. It needs to open to the left. We have ordered a 9"left ark and evidently it is not the right part. can we get one of these