Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

looking for lh operator from 80's vintage window 13.5 inch single arm.

The only identification I have is on the inside of the glass caradco 1974. Then the a on the window crank says Truth.

I need to replace 4 of these cranks outs. From a mid 80s Anderson split windows. I have two windows that would need both a left and right The long piece is approx 12? Any help is appreciated

Weathervane casement window parts still available or is there a replacement? Looking for rh & lh.

I have a caradco 30382 however it is not 9 1/2" so the 39-028E and 39-027E will not work.Any thoughts?ThanksRocco

I'm Replacing a truth operator for an awning style window it matches up very closely with part 39-013, but I need the black plastic shoe from the style the opener 39-312 added to it. Is there a better part # for what I need, or can you add the shoe to opener #39- 013? attached is a photo of unit ... (cont.)

I am in need of 2 casement window operators one right hand one left hand. windows and operators are identical and mirror images of each other. both have one arm out of the operator and have a shorter arm connected to the window sash from the frame. Some identifying features include; etched into the ... (cont.)

Want crank identity so I can order 2

I need 2 right, 2 left, and 1 awning operators as pictured. The awning operator has been removed so I'm hoping you will have an idea of what it should be based on the style of the casements

The windows are still good but the handle has stripped. I have a smaller casement by the same company that I might also want replaced. The part number is the same on the handle The second window is narrower and shorter but also a casement; I can send you pictures of that also if you have the par ... (cont.)

Looking for replacement parts for this

I have bought parts from you prior for my TRUTH window parts. My neighbors are also labelled TRUTH but are very different shaped than mine. I am trying to find parts for him.

Please specify a replacement mechanism For a Truth 40055 which is stamped on the underside of the gear body housing. Does the arm length only affect the opening width? Will a shorter arm work?

Need to replace the attached window cranks. I would like to match the style as close as possible.

Backside has the following # engraved: 45035-RH. This is one-piece, straight single arm.

I'm trying to find a replacement for this brass/gold colored LH casement crank.

Most of our windows are okay, with some that still have working mechanisms but the plastic part located at the end of the arm is not removable and comes out of the track on the actual window itself when you try to open it or close it. Therefore, we are looking for at least 4 complete sets. ... (cont.)

This operator is similar to the 39-221 but I need stiff arm.

I need a Truth straight arm operator that is 12-1/2" long

Can you advise what I need?