Viewing all customer Discussions for:

39-013 Casement Window Operator, 13-1/2" Arm

I need to replace a number of these cranks. I see the 39-013 an d39-014 (bronze) will work for me. Is there a fold-down handle replacement I could purchase instead?

Need left and right crankouts to replace 40055 and 40056 with four screw holes and 13.5" arm.

We have two casement windows in a bay window. Both cranks are broken. One handle is striped and the other is striped and has fallen out of the window. Do you have replacement mechanisms that fit these windows? Also notice both have been kept in place with foam. Do you have a solution for attachme ... (cont.)

Do you have a replacement part for old Malta casement window crank set number 30350. The pins have rusted out on all of ours making the windows useless. I see on your site that this appears to be a common problem.

Would Like To Order One.

What parts can be used for replacement? I see Truth crank ID 45012 30744 on short piece

I am looking for 4 identical pieces of Casement Operators / Window Cranks. See pictures. These operators were for Viplex Brand widows which I had installed in 2007. The operators are all worn out and we can no longer operate the windows. We have to do them manually. These operators have the "Truth" ... (cont.)

Need to replace some Craftline window cranks and arms in a 30 year old condo, can you help?

Need replacement mechanism for other window. Distance between outer screws on mechanism box is approximately 3 inches

I have Caradco casement windows but the crank/arm measurement is longer than the example on your webside for that particular part and you seem to only carry the one size. The arm itself is approx. 12". Do you sell a larger/longer crank size or are they standard? The windows were installed in 1971. ... (cont.)

I have this number on my cranks - Made by TRUTH 45136 So far the only thing I have found here is the 39-255. I also need the 13.5 arm. The other one that was reference didn't have the same screw holes. Thank you

window has broken plate making open/close non operational in suitable manner

Where do I order parts?

I'd like to get two of these operators and the corresponding handles. Thank you.

Can you provide (or point me to a source) for the 9/16th nylon rollers, as used for example on the 39-013 casement window operator? I require four of them. Thanks!

I do not see any identifying names on this mechanism. I am on the ocean and keep windows open all the time, so salt air and exposure make for rusted mechanisms. I have contractor friends and also a handyman who can do the work. Please let me know if you need more detailed photos. Thanks for your ... (cont.)

I'm looking for a replacement for a Truth 40055 operator. It is 13.5 inches from pivot point to nylon wheel. I can't find the exact part can you suggest an alternative?

Please see attached photos. I am looking for window cranks for crank-out windows. Need a number of them. Probably would also like to buy related hardware to completely rebuild window mechanisms.

I am looking for cranks that are similar to your item 39-028, but with an arm length of 11" instead of the 9 1/2". If you can locate, I will need both a left and right in the Dark Bronze color. The 11" is measured from the same point as in your picture. Question: if you do not have an 11", would ... (cont.)

I am pretty positive I need 2 -(left and right)Truth window casement operator parts #39-027E. Here's what I need to know before I order. On YOUR measurement for the single arm in a part photo, you have 9 1/2 inch arm. In YOUR measurement drawing in one of the actual photos, it says 9 1/2 inch arm f ... (cont.)