Viewing all customer Discussions for:

39-016 Pan Am/Daryl Window Crank

The pivot bar bearings on 3-season room windows have shattered over time. Can you suggest a replacement?

I cannot find any markings on the window or parts. The windows are probably 55 to 60 years old. It is the threads on the piece that attaches the handle to the opener that have worn off. I hope you can help me.

Looking for this crank not sure which one to get

I need to replace please send info. For the part! Thanku pan -am window crank I sent pictures yesterday also! Thanku ina hurry wanna fix it's hot need a.c without letting the cool air out!

Markings inside read 3RH 18-0821

Awning window parts The swingarm has a measurement of 2&5/16". All other measurements are the same as part number 39-350. I need three left hand and two right hand actuators. I also need three shoulder screws 33-070 torque bar bearings 36-018H. Thank you William

My part has several #'s inside casting= PAT. NO. D-198,202 U.S., RO.1963 CAN. 11500-4 NO OTHER MARKINGS I COULD FIND? Checked all measurements. You have a great website. upper mounting holes are 7/16 " apart, lower holes are 1 5/16" (close to the 1 3/8" on #39-016). Think I could open holes slight ... (cont.)

Need replacements for old window cranks. House is old and nothing is standard. Can't identify manufacturer, although Swisco seems to be very close, if not it exactly. Crank base has the following part no engraved inside: PT NO 10-9231-LH-4.

I have attached several Photos of a window crank from house with four tier louvre window build in 19608 The screw hole is tiny probably close to 3/8 Others we tried had much bigger screw/bushing hole Could you help us identifying maybe

I have some tripane window from the 70s that open to the outside from and side crank. The handle fell off and will not screw back in. These are awning windows with three panes in a breezeway. Would measurements of the handle help? Thanks.I am not sure if I need a replacement part and which one to ge ... (cont.)

Do you have a part to match mine. I have 8 of these and would like to replace them all. Inside the part it reads: PAT NO. D-198202 US 2RH RD.63. CAN I've included a page where I traced and measured to the best of my ability to try to help you

Hi I'm looking for the gear box for my lemco 30 window, it's stripped out

pat.no.d-198,202 USRD 1963 CAN.11500-4I need handles for left an right..Mike

Customer service I need a crank mechanism for my window. Pictures are included The flexible arm is 3 inches with the holes being 2 3/8 inches from center to center. The opening of the mounting hole of the arm to the window arm is 1/4 inch. The 2 lower mounting holes are 1 5/16 center to center w ... (cont.)

Hello I am trying to find replacements left and right for the depicted operators. They have the following #'s inside the body. Pat. No. D-198 202 U.S.RD 1963 Can. 11500-4. I believe these are the numbers some are obscured.Thanks in advance.Mike

Hello. Hopefully you can help. My wife and I live in a condo in Honolulu?Villa At Eaton Square. I am attaching two photos. I need to purchase one window crank. Can you tell from the photos which one we need (I saw a reference to a 016, and a 017, but I don?t know which is correct)? Thank you ... (cont.)

is this the pan american

This looks very much like the Pan Am/ Daryl window crank (39-016) on your website, and the outer dimensions and distances between holes for the mounting screws are fine as shown in the first photo. However, the distance between the center holes in the arm that attaches to the window are 2 3/4 inc ... (cont.)

I, too, have LEMCO Series 30 awning windows. I am looking for the LEFT HAND crank.

Greetings! I recently ordered and received part 39-016 option: mill. This part does not meet my needs as it does not fit. I need a left hand crank with these dimensions. Height 5.25