Viewing all customer Discussions for:

39-032 EntryGard Dual Arm Operator

I would need both the right and left operator and two handles and cover please let me know the replacement numbers Thanks Mike

I am looking for these

Hello! I am trying to figure out what hardware this is, the chrome is pitted and I would like to replace the chrome items with a bronze to avoid a repeated pitting in the costal condition. Can you please help me identify this hardware? Some of the windows have a truth logo on the armature, but I can ... (cont.)

Hi, I'm trying to figure out which type of casement window window opener i have in order to replace it. I know it is a Truth Hardware item, it opens Left and the so line on the handle and shaft are stripped. I have attached some photos for you. Please note that the photo of the window in the open p ... (cont.)

Which part is this one?

I have 2 windows that need new hardware as they do not close. On one, the plastic is cracked. On the other the cover is coming out and it will not close. Note that each one opens a different directions. What do I need to order please?

The spiral piece that engages the gears opens windows but when closing it it just "unscrews" from the mechanism and detaches. It's on an entrygard by truth. Probably older(just bought the home)

Hello. My window crank is broken and I need to replace it. It says Entry Gardens Truth, and there are two numbers on it: 31538A and 20810A. Can you help me order the proper replacement? Thank you.

Lincoln Window. Gut of crank seems to be stripped. Cannot close window must manually push shut to close and lock window. Extended double arms measure approximately 17 inches. (my best measurement) Thank you for your assessment!Alice

Need replacement for operator. Looks like 2 - arm style. Long arm / single bar is 9.5". The 2nd bar has 2 pieces, bar from gear 3.75", 2nd bar to window 4.375" Do you have replacement?

The Crank on a casement window has driven the worm gear out of the casting. I have attached a picture of the crank assemble. The window is a left hand window, i.e. left hand crank and the crank is a dual arm. The S shape arm is under the ruler. The short arm attached to the S shape arm is about ... (cont.)

Hello,The cylinder broke off of my Nuprime window hardware and I'm hoping to find a suitable replacement. The base plate is 2-1/8" x 4-7/8" and the arm lengths are 3-1/2" and 8". The color is beige. Can you provide me a suitable replacement for this?Thanks,Jed

Large arm: 30470LH (9 1/2") Small arm: 20810 (4 3/8") and L30841 (3 1/2") Plate: 40372, Yoke: 30830 The small arm has an upward offset.

Hi. Can you direct me to the correct part? I think I need at least three handles. I am not sure if I need the actual crank until I get in there. Are parts returnable in case I overbuy?

I have a Best Bilt window with a Truth operator that needs replaced. The long arm has # LH 30470, short arm has # 30744. It also has two arms on top, long arm # 20810, short arm # 30841L. I did not take any measurements.

One of my windows, the spline won't stay in so window doesn't operate, truth window all I see is 30636 on the arm thing, which part would replace this please if anyone knows?

These are photos of a working assembly. I have several assemblies that are rusted which causes the window to deform out of square when open and close incompletely. The lower post/hinge of one is rusted through. Thank you Mike

20810A

I have a Semco window. The window hardware is Truth Entry Guard with numbers on the hardware: 40471, 30841L, 20810. The window crank is stripped out.

Hi not sure what model I need for this.Can you identify should be a right-hand crank i believe.#30710 number on the body and #20755 is on the clip armThank-YouBill