Viewing all customer Discussions for:

39-035 Truth Hardware Entrygard Dyad Window Operator

Greetings, In replacing a window we lost the Entry-gard (Truth) attachment to the window. This is an old 1999 Caradco window and have not been able to get a replacement hardware for this casement window. I've attached a photo of the casement hardware on the window and a photo of the dimensions. A ... (cont.)

KK is in cover. For Andersen casement window from late-1980s.

Hello - This single arm operator had the worm gear push out. I cannot find a similar single arm operator anywhere. DO YOU HAVE THE EXACT REPLACEMENT PART OR ONLY SOMETHING CLOSE? It looks exactly like the image posted back in august 12, 2014 in which Tom from SWISCO responded: "August 12, 2014 I ... (cont.)

I am having some difficulty with my window. Specifically, I can?t close it using the crank. In other words, when I turn the crank, the window does not move. Consequently, I have to close it manually. The hardware on the window appears to be very old and/or broken. If possible, I?d like to re ... (cont.)

Hello, We need to replace, what I think is called the operator, on a Hurd casement window. The right side looking out will crank out, but won't crank in. I attached images of the working side of the window (left). The part says "EntryGard Truth" on it. I also need new cranks and 2 plastic cover ... (cont.)

need to replace this opener ...it is a truth with numbers 30744 stamped on it...both arms are approx 5" long

The window will crank open but not shut. Owens Corning number 622009. This crank is located on the rhs of the window looking out. The glass dimensions are 33.5 by 35.5 inches. I suspect the problem is the end of the large metal actuating screw.(per photo) Appreciate your advice on what I need. Thank ... (cont.)

I sent u a picture of the hardware

I'm looking for the mechanism for a pizza crank, I need 3 left and 3 right can you help

Need to replace Truth Entry Gard left-hand window operatorOpens window but does not close without manual assistance worm screw pulls out from the mechanismThink I need a complete mechanismThe number on upper arm 20810The number on lower arm 31229Pics depict the top view and under window attachment i ... (cont.)

I've attached a picture of the operator I need? Do you have a replacement? Thanks

Looking to repair or replace truth operator.

Can you tell me the part number for this crank that is for a smaller crank kitchen window. I am not able to locate the part numbers on your site. I need two, one left and one right. Thank you

Would like to order (2) of each: operator Truth EntryGard (photo #4) for casement with hinge on right edge as from inside; on back of long arm 30470LH cover no part number, white (photo #2) crank 45054, white (stripped (photo #1) bracket #20545 (photo #3)

Have several window cranks that have blown out and need replacement. Only marking found are Entry Guard, Truth and the number shown in the photo. Have not taken windows apart yet. Let me know if necessary. Appreciate any help you can offer.

thanks! Denise

casement crank mechanism

Please identify the following 3 items.

Single arm, 5/16 handle stud, part # on silver gear is 30843L, the arm attached to gear # 30841L and last arm with the clip is # 01802 A part # of 30830 is also on main housing. Can I buy this or a direct replacement for is

I need to find one (1) Andersen casement operator with fold down crank handle in bronze. The housing is stamped C-1081-111. The first arm is stamped S-1081-36 R and measures 4-1/8", the second arm is stamped S-1081-66 and measures 4-1/2". The hole spacings are 3-1/16" and 2-1/2"