Viewing all customer Discussions for:

39-061 Keller Window Crank

1717r inside part

Hello, I have a 1950s house with Keller awning windows. I am in need of replacement operators. The measurements are 5-1/4" top screw to bottom screw with a 2-3/4" arm extension. This is the old one and I saw somewhere on your site that the screw hole size in the link arm is important. I believe ... (cont.)

Trying to identify the replacement part for the crank mechanism on a jalousie window. The crank comes off when you close the window.

Stamped part number 1717R I need two of these and one left. The only difference in the picture is mine only has one screw hole on the top.

Hello I'm looking for a new operator for my crank windows in my patio the one on my window looks identical to the one in your video on how to install before I order it I'd like to just know the exact part number to order. Thanks Robert

Hello - was hoping you could help with identifying a crank. The interior markings are: Pat. No. 198202 US 2 R.H. RD. 1963 CAN 93 Thanks for the help.

Dear SWISCO Customer Service: I bought and received a 39-025 Awning Window Crank Operator replacement from SWISCO. At the end of 2-3/8 tongue on the crank operator, you provide a shoulder type screw. The shoulder screw diameter is too big and I cannot insert to the existing hole at the window. ... (cont.)

Do you have a replacement for this crank out window crank and handle D198202U 11500-3 1RH RD 1968 OAM Thanks, Terry

I would like to get replacement cranks for PGT awning windows. The body from tip to tip is 5 7/8" long, 15/16" wide and is 2 1/8" at bottom where screws holes are located. Screw holes are 5 3/16" centers top to bottom and lower screws are 1 1/8" apart center. The distance between hole centers on the ... (cont.)

Need to replace crank and housing will open but unscrews handle if I try to close by reversing..

The first picture is what you just sent me and the second is a picture of the old operator that does not work anymore. I received a part from you that seemed to be the right one but there is a screw attached on the arm that can not be removed, thus I can't use it. Do you have an identical part to ... (cont.)

need two one right one left

My crank handle stripped. Unable to close window

Hello, I have several white window cranks which needs to be replaced, both left and right. The local store I use to purchase from is no longer open. The most recent cranks purchased from there had 1717R imprinted on the inside, but for some reason only lasted a short time after opening the window a ... (cont.)

I am trying to find out what operator could be used to replace the ones I have depicted in the figure and photos attached. Also can handles be purchased independently. My guess is these windows were original with the house from around the 1960's in north Florida.

I ordered 3 #39-061 which do not fit my application. I did not look closely enough at the specs and will be returning them. I think I need 3) #39-025 instead. I did not see part 39-025 available in mill (silver). Could you verify #39-025 match the photos I have attached? Lastly, is 39-025 avail ... (cont.)

Help

Hi,I'm having some trouble identifying the correct window operators for my application. I've attached some pictures but please let me know if I need to take additional measurements.Thanks!Albert

Look to be circa 1980 or so... left hand rotos. Original window manufacturer unknown.

Unable to find replacements at any local stores. Can you help me out? Thank you. Gabe