Viewing all customer Discussions for:

39-061 Keller Window Crank

I need a Left-Hand crank with a 3 7/8 arm and 1/2" screw.

there are three screw holes to hold the crank case-- top left and a little above right bottom. there are 23 crank cases in the house and some of the screw aren't holding. they appear to be a 3/8 inch across. should i be using bigger screws to hold or somekind of self tightening if they make them. s ... (cont.)

Have old crank windows with broken crank.

5 1/2" upper & lower mounting hole 2" bottom plate with 2 screws 5/8" between screws Length of arms: Top 4" Middle 10" Bottom 4" That's the best I can do

the measurements all seem to match. question about the 3/8 hole- mine is threaded to accept threads on bolt/screw. Are there threads in that hole? if not I possible could do a work around or less you have the exact match.

I a not sure what to buy here are pictures. Of the items a operator and a Broken latch piece on the window itself

Crank just spins and doesn't move window. I am unable to remove the bolt that attaches the lever that I am supposed to b able to remove. Any ideas? This house was built in 1979. Thank u for your time.

Can you tell us what the distance between screw holes is, from top to bottom? This will allow our parts experts to better recommend replacement options.

Hello,WE'd be happy to help but it's tough for us to narrow down your replacement options without seeing the arms that move the window. We'd have a much better chance of finding the correct replacement for you if you could show us a picture of the operator removed form the window with a clear view o ... (cont.)

need bronze replacement awning window operators and am not sure which one will fit. Frame has the name "PGT". Need 5 left and 5 right.

I am trying to purchase this part to replace a broken one.

The house was built in 1968 in Fort Myers, Florida. Some have stripped gears internally. We want to replace all 11 window cranks.

Just looking for replacement cranks on the right. Thank you!

the controller arm's screw hole is small.

Hi, This is from a Florida 50s era home. It is right-hand position. Has a worm gear insert that falls out. The handle crank is attached to the worm gear.

Aloha,I have what appears to be 39-061 right handed operator.I've ordered but wanted to confirm this is looks right.I've already ordered washer 33-070 to replace missing ones and they fit perfectly so I'm hoping 39-061 is the right one.Thanks in advance for your help!Mahalo,Erich "Sharky" Schrottke ... (cont.)

I just bought a house full of awning windows. Several have stripped handles. I think your site might have the right size. Could you please look at these photos and tell me if the 39-025 and 026 are the right ones? If so I might start with two of each (in bronze) to make sure they will work. I?m not ... (cont.)

The subject operator is depicted in the attached photos with the handle removed and sitting beside it on the windowsill. These are awning style windows from a house built in Broward Count, Florida in 1968. I noticed the window was slightly ajar and when I went to close it, the screw mechanism that t ... (cont.)

Hello Hope you can help me out finding the correct replacement for my windows, I need 4 Please see attached photo for your reference.

Hello, I bought an old apartment (1983) with original windows (uggggg) the majority of them work fine, they lock but there are a few that only one side the pin does not lock in the hook. They both seem to be in the right place compared to the other side that works so I am not sure what the problem ... (cont.)