Viewing all customer Discussions for:

Door & Window

I am looking to replace window latch but I can't find this model. It has two areas to snap in 2 inches apart. 3 3/8 in x 2cm

Hello, Looking to replace some cranks and I need a little guidance. They are Truth cranks. I measured 8-3/4 for the arm, but I probably didn't measure correctly. I will have to go back and do it again. I did take some pictures of the model numbers, but not sure how much they will help. Any guidanc ... (cont.)

2 and one fourth latch is too wide to slide into receptor 5 16th. Do you have similar latch that is not soo wide, or latch with thinner slide?

The crank is labeled on the back with Truth. US pat 351490 5560082 Please advise on correct replacement

Hi, I have some Patriot 1800j 33in windows that have broken shoes. The balance stamp says 30B. I want to order the default 795 30B with the 1 1/4 T shoe and screw in clip. I believe the current shoes are 1 1/4 but look like open cam and the default 795 comes with closed cam. I don't see any rea ... (cont.)

I can't seem to find the 26D anywhere for a Milgard tilt window balancer

We have what we believe are Anderson sliders. This is the label on the inside frame of the slider and what the roller looks like. Can you help find replacements?

This measures approximately 3/4" on the face and on the flat extended part that slides behind the glass pack. Any ideas for a replacement part? Thank you

I have a tilt window and I think is missing something between the top pivot and hinge shoe. I don't know the manufacturer of the window, the label is missing. Can you help identify the missing balance? I removed the window from the pivot to get a better picture. Have a great day! ... (cont.)

Our owner gave me a piece of this insert and said find it. Was told it goes on the bottom of a commercial door but there was no sweep on the door.

19 4BSI

Thanks for listening.I recently ordered several replacement parts. I'm trying to replace broken Primary Casement Sash Locks on several previously installed Loewen windows. The fist photograph shows the new lock installed and the original keeper. The problem is the new lock will not engage the old ... (cont.)

Hi I need 2 of these. And a rod on the bottom of the window Also a jamb spreader tool

Milgard vinyl windows, single hung, ~2004 The balance has the numbers 32 5 stamped on it. The metal part is 32-7/8" x 5/8" x 5/8" I need 4 of these

Please see attached images. I have a few windows with this snap-in glazing, and it is not the same size as I see in your options. Please help. Cole, Dave's Glass Shop.

HelloI need 6 sashes to match the ones in the attached pictures. Number on the sash is 2730 ISEWill these come with the plastic pieces already attached and ready to install?Regards,Carmen

Need the part number for the casement window crank operator on the hinges

5/8 Top Sash Guide with 3/4 screw hole from top. I believe they are your 18-033 and i believe the windows are 390 Series cause the channel balance are 1 and 1/8 inch at the bottom.Gonna need to return the sash guides i ordered. And will need channel balance for the 390 series in a few different size ... (cont.)

I have 12 windows with broken latches and Chanel balances that make it nearly impossible to open the windows. According to your instructions I need 21 inch. Series 795 Channel Balance Product Code: S795-21 But I need 1 1/4" open cam shoes. Do you not sell them this way? Also,I am uncertain about wh ... (cont.)

Hello, any chance you know what these are & if you have a few in-house, I could purchase them. Need 8 in total. I also need 2 more of the last items I purchased from you guys which i'm hoping I can toss in with this order.