Viewing all customer Discussions for:

Door & Window

casement window crank plastic outer assembly cracked

Looking to secure this door by using a key to gain entrance. As you noticed there is no inner working. Looking for the handles - inside and outside, inner guts, With a key access to the outside and thumb lever on the inside.

Hi there. The outside black handle on my possible PPG Hercules keylock slider door broke last year and I need to repair it. I can't seem to find the correct part. Ideally looking for just the outside handle portion to replace as the key lock works fine...just the handle portion broke off and look ... (cont.)

Double hung vinyl replacement window circa 2003 Part of the lift mechanism, bottom tab on right side (as viewed from inside of house) of sash fits into this slide mechanism. The cast metal insert is broken. Might be a good idea to replace both sides.

Not sure what brand I need it has one mounting hole at top two mounting holes at bottom

I ordered 39-094. I do not think this is the correct replacement.

We have Andersen windows - the tilt-wash (release) option is part of the lock (twist to the right). Do you have this style of window lock in stock (or a potential replacement)? Thank you for your help.

I believe I need a 27" series 385. However the guide attached to the side of the window sash is hard to figure out which one I need. Also, I'm assuming I'll need a 2640 option as my window sash is 19lbs 4oz?? I just don't want the window too difficult to close and 19lbs is right on the cusp of two s ... (cont.)

Part Cav.4P.N.41131

Do you have parts for Acorn aluminum sliding doors?

I need to order the part for my tilt window tilt balances, pivot shoes, and top/bottom latches on my window as shown in the attached photos. The window balance tube is 5/8" diameter and 24" long.

I have a property with simonton windows, which have some broken and missing parts. I have broken tilt latches, broken pivot bars, and completely missing balance assembly on one of the windows. I would like to replace them, but I am not sure which items match.

Pictures are of one size I have. 27" length, 5/8" channel, 26-4. Just making sure what attachments I need / how to make sure the ends are the same.

I need a new pivot foot for a window. I have attached a picture of the label on the window with the numbers on it. I am not sure but I think the windows are American craftsman purchased at Home Depot. Around 10 years ago.

can you help me identify this balancer thank you Kirk

hello - looking for replacement balancers for 1996 Migard window. Balancers are 27" long. Photos attached. Thanks very much!

Went to change window out w a new on-balance broke. Need new ones- this is the stamp. Do I need to replace both sides?

comes from a Marvin window size 2 5/8 X 5/8 X 3/8

Hi, I believe you have replacement parts for this old block and tackle balance. This is a single hung window, about 39" x 29" The metal clips at the bottom of the window are 2 1/2 " long. One has a 4 on it and one has a 5 on it.The rod unit is over all 27" long.The black piece at the bottom of the r ... (cont.)

My lock no longer locks or closes.. I need a door handle with lock.. looks like there was small bar n it broke off.. this is original to mobile home 1990.. can you help