Viewing all customer Discussions for:

Door & Window

30 year old sliding screen on patio door. Wheels are fine, but plastic posts, the axels, are no longer round, flat sided and wheels cannot turn in a circle, bind everywhere. I have no idea how to get the plasic post, knobby thing, to engage with whatever remains inside the door also. thanks for any ... (cont.)

Hello this piece broke off my window. The part that it slides into is part 4610108. also this is from the upper half (sash?) of the window that can be pulled down to open the top portion.

This looks like the mortise lock I need to replace a Marvin sliding patio door. 1. What does round face mean? 2. Does left pull door vs. right pull door make any difference with regard to the mortise lock I order? I am submitting photos of the lock I need to replace below. Thanks. ... (cont.)

21"Stamp 20 29 QWhich is the appropriate channel balance to order? Thank youPatricia

Hello, is there something somewhere on these old sliding mirror doors that I can give you to know what hardward set up I need. I picked these doors up off of Craigslist but need the hardware. They are very heavy doors!Thank you,Tina

I have visited every department and builder surplus store and cannot find matching internal tilt latch replacements for these windows. I am trying to avoid buying brand new replacement windows because they only need the latches. I also cannot find a manufacturer label or serial number. Please let me ... (cont.)

I've ordered 58-055 for the top and bottom of my window, but noticed this ribbed weather stripping in the middle where the two windows meet. what type is this, I placed an order today, but may need to add this weather stripping to it. Home was built in 1998

Hello ... i'm sure you can help. one of the photo's shows the only marking, 1940F I also have one set of bigger windows that appears to be marked 27D. I would also need the window sash cams but I ran out of photo room. I have 6 windows which are 42" high. The metal length on those balances is 20 ... (cont.)

I have a Cole Sewell Estate Series model #500 exterior door in need of a new handle and plate It is 9 1/4? t x 5/8? w Do you have something similar that will work ? I have looked at you site and it looks like you do Please include the part(s) #?s needed and price so I place an order with you. I hav ... (cont.)

part #38-903. can you tell me the distance between the 2 rollers. what i have measures 18.5" center to center.

Please let me know if you have this part?

I am looking for replacement Sliding Window Rollers With Plastic Housing For windows manufactured by Werner Windows of the USA durint the late 1980?s and early 1990?s. Might you be able to assist me?

I'm having some difficulty finding a replacement for a sling out storm door with a backset measurement of 1 1/2". The current mounting holes for the handle are 1 3/4" on center. The previous handle also had mounting holes for a deadbolt lock centered at 1 3/4". The door thickness is 1 1/2" as well. ... (cont.)

From what I can tell the replacement balance should be a Series 385 with a custom shoe. You can see the shoe, top and numbers in the attached photos. The window panel weighs 23 pounds. I will need two (2) balances. The length of channel to nearest 1/8" is 25 - 5/8". As I mentioned on the phone, the ... (cont.)

Need a vent latch as shown in picture. There is a letter B and a number 5 on one side. There is a PAT #5,553,903 on the other side.

Please help me identifying this snap-in to place order.

Look for screen corners to match Thickness 3/16 1"x1" square corner with a spline insert

These are Thermolock windows installed in 1999. Cam measures approximately 1-3/8"wide, 2-1/16" tall, 9/16" deep. Will also need a spiral tensioner tool.

Here?s my contact information . I?m looking for awning window parts.

Good Morning, I have vinyl panels in my lanai. My house was built in 1999 and the plastic latches for my panels are snapping off now due to time and weather. I've attached a copy of the latch. The latch pulls back to allow a "peg" at the end of the window to engage into the slot the panel goes into. ... (cont.)